Thermal Sprayed Bioceramic Coatings: Nanostructured Hydroxyapatite (HA) and HA-Based Composites - Biological and Biomedical Coatings: Processing and Characterization - page 196

Li, H., Khor, K.A., and Cheang, P. 2006. Effect of steam treatment during plasma spraying on
the microstructure of hydroxyapatite (HA) splats and coatings. J. Therm. Spray Technol. 15:
610-616.
Li, H., Khor, K.A., and Cheang, P. 2007a. Adhesive and bending failure of thermal sprayed hydroxy-
apatite coatings: Effect of the nanostructures at interface and crack propagation phenomenon
during bending. Eng. Fract. Mech. 74: 1894-1903.
Li, H., Khor, K.A., Chen, W.N., Tan, T.L., Pan, H., and Cheang, P. 2007b. Proteomics study of the osteo-
blast cells proliferated on nanostructured hydroxyapatite coatings. Key Eng. Mater. 330-332:
381-384.
Li, H., Khor, K.A., Chow, V., and Cheang, P. 2007c. Nanostructural characteristics, mechanical prop-
erties, and osteoblast response of spark plasma sintered hydroxyapatite. J. Biomed. Mater. Res.
82A: 296-303.
Li, H., Khor, K.A., Kumar, R., and Cheang, P. 2004b. Characterization of hydroxyapatite/nano-
zirconia composite coatings deposited by high velocity oxy-fuel (HVOF) spray process. Surf.
Coat. Technol. 182: 227-236.
Li, H., Ng, B.S., Khor, K.A., Cheang, P., and Clyne, T.W. 2004c. Raman spectroscopy determination
of phases within thermal sprayed hydroxyapatite splats and subsequent in vitro dissolution
examination. Acta Mater. 52: 445-453.
Li, J., Liao, H., and Hermansson, L. 1996. Sintering of partially-stabilized zirconia and partially-
stabilized zirconia-hydroxyapatite composites by hot isostatic pressing and pressureless sinter-
ing. Biomaterials 17: 1787-1790.
Liao, C., Lin, F., Chen, K., and Sun, J. 1999. Thermal decomposition and reconstitution of hydroxy-
apatite in air atmosphere. Biomaterials 20: 1807-1813.
Liao, H., Normand, B., and Coddet, C. 2000. Influence of coating microstructure on the abrasive wear
resistance of WC/Co cermet coatings. Surf. Coat. Technol. 124: 235-242.
Lima, R.S., Kucuk, A., and Berndt, C.C. 2001. Integrity of nanostructured partially stabilized zirconia
after plasma spray processing. Mater. Sci. Eng. A 313: 75-82.
Lin, F., Liao, C., Chen, K., and Sun, J. 2000. Thermal reconstruction behavior of the quenched hydroxy-
apatite powder during reheating in air. Mater. Sci. Eng. C 13: 97-104.
Liu, D.M., Chou, H.M., and Wu, J.D. 1994. Plasma-sprayed hydroxyatptite coating: effect of different
calcium phosphate ceramics. J. Mater. Sci.: Mater. Med. 5: 147-153.
Lopes, M.A., Santos, J.D., Monteriro, F.J., and Knowles, J.C. 1998. Glass-reinforced hydroxyapatite: A
comprehensive study of the effect of glass composition on the crystallography of the compos-
ite. J. Biomed. Mater. Res. 39: 244-251.
Lopez-Sastre, A., Gonzalo-Orden, J.M., Altonage, J.A.R., Altonaga, J.R., and Orden, M.A. 1998.
Coating titanium implants with bioglass and with hydroxyapatite: A comparative study in
sheep. Int. Orthop. (SICOT). 22: 380-383.
Lugscheider, L., Remer, P., and Nyland, A. 1996. High velocity oxy fuel spraying: An alternative to
the established APS-process for production of bioactive coatings. In: Sudarsan, T.S., Khor, K.A.,
and Jeandin, M. (eds.), Proceedings of the Tenth International Conference on Surface Modification
Technologies , Singapore, 1996, pp. 717-727.
Luo, Z.S., Cui, F.Z., and Li, W.Z. 1999. Low-temperature crystallization of calcium phosphate coat-
ings synthesized by ion-beam-assisted deposition. J. Biomed. Mater. Res. 46: 80-86.
Maxian, S.H., Zawadsky, J.P., and Dunn, M.G. 1993a. In vitro evaluation of amorphous calcium phos-
phate and poorly crystallized hydroxyapatite coatings on titanium implants. J. Biomed. Mater.
Res. 27: 111-117.
Maxian, S.H., Zawadsky, J.P., and Dunn, M.G. 1993b. Mechanical and histological evaluation of
amorphous calcium phosphate and poorly crystallized hydroxyapatite coatings on titanium
implants . J. Biomed. Mater. Res. 24: 717-728.
McPherson, R., Gane, N., and Bastow, T.J. 1995. Structural characterization of plasma-sprayed
hydroxylapatite coatings. J. Mater. Sci. Mater. Med. 6: 327-334.
Meyer, U., and Wiesmann, H.P. 2006. Bone and Cartilage Engineering. Springer, Berlin .