Thermal Sprayed Bioceramic Coatings: Nanostructured Hydroxyapatite (HA) and HA-Based Composites - Biological and Biomedical Coatings: Processing and Characterization - page 194

Howard, S.J. and Clyne, T.W. 1991. Interfacial fracture toughness of vacuum-plasma-sprayed coat-
ings. Surf. Coat. Technol. 45: 333-342.
Howard, S.J., Phillips, A.J., and Clyne, T.W. 1993. The interpretation of data from the four-point bend
delamination test to measure interfacial fracture toughness. Composites. 24: 103-112.
Howard, S.J., Tsui, Y.C., and Clyne, T.W. 1994. The effect of residual stresses on the debonding of coat-
ings-I: A model for delamination at a bimaterial interface. Acta Metall. Mater. , 42, 2823-2836.
Hwang, K. and Lim, Y. 1999. Chemical and structural changes of hydroxyapatite films by using a
sol-gel method. Surf. Coat. Technol. 115: 172-175.
Inadome, T., Hayashi, K., Nakashima, Y., Tsumura, H., and Sugioka, Y. 1995. Comparison of bone-
implant interface shear strength of hydroxyapatite-coated and alumina-coated implants. J.
Biomed. Mater. Res. 29: 19-24.
Ishihara, S., Mcevily, A.J., Goshima, T., Kanekasu, K., and Nara, T. 2000. On fatigue lifetimes and
fatigue crack growth behavior of bone cement. J. Mater. Sci. Mater. Med. 11: 661-666.
Ishikawa, K., Miyamoto, Y., Nagayama, M., and Asaoka, K. 1997. Blast coating method: New method
of coating titanium surface with hydroxyapatite at room temperature. J. Biomed. Mater. Res. 38:
129-134.
Jarcho, M. 1981. Calcium phosphate ceramics as hard tissue prosthetics. Clin. Orthop. Relat. Res. 157:
259-278.
Ji, H. and Marquis, P.M. 1993. Effect of heat treatment on the microstructure of plasma-sprayed
hydroxyapatite coating. Biomaterials 14: 64-68.
Jiang, X., Sampath, S., and Herman, H. 2001. Grain morphology of molybdenum splats plasma-
sprayed on glass substrates. Mater. Sci. Eng. A299: 235-240.
Kanagaraja, S., Wennerberg, A., Eriksson, C., and Nygren, H. 2001. Cellular reactions and bone appo-
sition to titanium surfaces with different surface roughness and oxide thickness cleaned by
oxidation. Biomaterials 22: 1809-1818.
Khor, K.A. and Cheang P. 1994a. Effect of powder feedstock on thermal sprayed hydroxyapatite coat-
ings. In: Berndt, C.C. and Sampath, S. (eds.), Thermal Spray: Industrial Applications , Proceedings of
the Seventh National Thermal Spray Conference , Boston, MA, pp. 147-152.
Khor, K.A., and Cheang, P. 1994b. Laser post-treatment of thermally sprayed hydroxyapatite coat-
ings. In: Berndt, C.C. and Sampath, S. (eds.), Thermal Spray: Industrial Applications , Proceedings of
the Seventh National Thermal Spray Conference , Boston, MA, pp. 153-157.
Khor, K.A., Gu, Y.W., and Dong, Z.L. 2000. Plasma spraying of functionally graded yttria stabilized
zirconia/NiCoCrAlY coating system using composite powders . J. Therm. Spray Technol. 9:
245-249.
Khor, K.A., Li, H., and Cheang, P. 2003a. Characterization of the bone-like apatite precipitated on
HVOF sprayed calcium phosphate deposits. Biomaterials 24: 769-775.
Khor, K.A., Li, H., and Cheang, P. 2004. Significance of melt-fraction in HVOF sprayed hydroxyapa-
tite particles, splats and coatings. Biomaterials 25: 1177-1186.
Khor, K.A., Li, H., Cheang, P., and Boey, S.Y. 2003b. In vitro behavior of HVOF sprayed calcium phos-
phate splats and coatings. Biomaterials 24: 723-735.
Kido, H. and Saha, S. 1998. Effect of HA coating on the dental implants: past, present and future
directions . Proc. 16th Southern Biomedical Engineering Conf ., pp. 272-275.
Kijk, K., Schaeken, H.G., Wolde, J.G.C., and Jansen, J.A. 1996. Influence of annealing temperature on
RF magnetron sputtered calcium phosphate coatings. Biomaterials 17: 405-410.
Kim, H., Georgiou, G., Knowles, J.C., Koh, Y., and Kim, H. 2004. Calcium phosphates and glass com-
posite coatings on zirconia for enhanced biocompatibility. Biomaterials 25: 4203-4213.
Klein, C.P.A.T., Wolke, J.G.C., de Blieck-Hogervorst, J.M.A., and de Groot, K. 1994. Features of cal-
cium phosphate plasma-sprayed coatings: An in vitro study. J. Biomed. Mater. Res. 28: 961-967.
Knabe, C., Howlett, C.R., Klar, F., and Zreiqat, H. 2004. The effect of different titanium and hydroxy-
apatite-coated dental implant surfaces on phenotypic expression of human bone-derived cells.
J. Biomed. Mater. Res. A 71: 98-107.
Kokubo, T., Kushitani, H., Sakka, S., Kitsugi, T., and Yamamuro, T. 1990. J. Biomed. Mater. Res. 24: 721.