Hardware Reference
In-Depth Information
More information and documentation, including an assembly guide, lives at
ht-
Attribution
The code for this project was downloaded from
http://code.google.com/p/avr-hardware-
random-number-generation/
.
The code was written by Geoff Steele. Alicia Gibb altered the
code by commenting out the fade functions so the building blinks LEDs on and off rather
than fade LEDs on and off.
The original Fritzing design by Davy Uittenbogerd of charlieplexing 20 LEDs was
Alicia Gibb altered this schematic into a Blinky Building form factor.
The original code and the hardware source files are both under a CC-BY-SA Creative
Commons license.
Code: CC-BY-SA: Geoff Steele.
Fritzing layout: CC-BY-SA: Davy Uittenbogerd.
Blinky Building schematic and board file: CC-BY-SA: Alicia Gibb.
Licensing
Blinky Buildings is an open source hardware product and follows the Open Source Hard-
ware Definition:
www.oshwa.org/definition
.
The license on the source files for Blinky Buildings is CC-BY-SA.
Distributed as is; no warranty given. Not suitable for people who might eat electronics.
Source Files
For the ease of reading, the main source files (schematic, board file, and code) are included
here as images. (See
Figure F.1
and
Figure F.2
.) All source files for the Blinky Buildings
kit, including the schematic, board file, 3D-printed enclosures, and 1:1 conversion, are on-
line at
http://bit.ly/blinkybuildings
.
