Hardware Reference
In-Depth Information
comprehensive IEEE-488.1 library:
Name
Description
ibask
Returns software configuration information
ibbna
Change access board of device
ibcac
Become active controller
ibclr
Clear specified device
ibcmd
Send GPIB commands from a string
ibcmda
Send GPIB commands asynchronously from a string
ibconfig
Configure the driver
ibdev
Open and initialize a device when the device name is unknown
ibdma
Enable/disable DMA
ibeos
Change EOS
ibeot
Change EOI
ibevent
Returns oldest recorded event
ibfind
Open a device and return its unit descriptor
ibgts
Go from active controller to standby
ibinit
Re-initializes library, reloads software configuration
ibist
Define IST bit
iblines
Return status of GPIB bus lines
ibln
Check for presence of device on bus
ibloc
Got to local
ibonl
Place device online/offline
ibpad
Change primary address
ibpct
Pass control
ibppc
Parallel poll configure
ibrd
Read data to a string
ibrda
Read data asynchronously
ibrdf
Read data to file
ibrdi
Read data to integer array
ibrdia
Read data asynchronously to integer array
ibrpp
Conduct parallel poll
ibrsc
Request/release system control
ibrsp
Return serial poll byte
ibrsv
Request service
ibsad
Define secondary address
ibsic
Send IFC
ibsre
Set/clear REN line
irsrq
Install an SRQ interrupt routine
ibstop
Stop asynchronous I/O operation
ibtmo
Define time limit
ibtrg
Trigger selected device
ibwait
Wait for event
ibwrt
Write data from a string
ibwrta
Write data asynchronously from a string
ibwrtf
Write data from file
ibwrti
Write data from integer array
ibwrtia
Write data asynchronously
