Information Technology Reference
In-Depth Information
Route 2
128 k
PC 1
PC 2
512 k
512 k
384 k
Route 1
Figure 10-13
Scenario Diagram
36. A user performs a Telnet from PC 1 to PC 2. If the metric used by the configured
routing protocol is the bandwidth parameter, which route will the packets take?
a.
Route 1
b.
Route 2
c.
Neither, because the information is insufficient.
d.
One packet takes Route 1, the following packet takes Route 2, and so on.
37. A user performs a Telnet from PC 1 to PC 2. If the metric used by the configured
routing protocol is hop count, which route will the packets take?
a.
Route 1
b.
Route 2
c.
Neither, because the information is insufficient.
d.
One packet takes Route 1, the following packet takes Route 2, and so on.
38. A user performs a Telnet from PC 1 to PC 2. If the metric used by the configured
routing protocol is OSPF cost, which route will the packets take?
a.
Route 1
b.
Route 2
c.
Neither, because the information is insufficient.
d.
One packet takes Route 1, the following packet takes Route 2, and so on.
Use Figure 10-14 to answer the remaining questions.
39. By default, if RIPv2 is enabled on all routers, what path is taken?
a.
Path 1
b.
Path 2
c.
Unequal load balancing with Path 1 and Path 2
d.
Equal load balancing with Path 1 and Path 2
 
Search WWH ::




Custom Search