Grain-Size Analysis of Soil (Including Both Mechanical and Hydrometer Analyses) - Soil Properties: Testing, Measurement, and Evaluation - page 117

10

CHAPTER TEN

CHAPTER TEN

Grain-Size Analysis
of Soil (Including
Both Mechanical
and Hydrometer
Analyses)

Grain-Size Analysis
of Soil (including
Both Mechanical
and Hydrometer
Analyses)

(Referenced Document: ASTM D 422)

Grain-size analysis, which is among the oldest of soil tests, is widely
used in engineering classifications of soils. Grain-size analysis is also
utilized in part of the specifications of soil for airfields, roads, earth
dams, and other soil embankment construction. Additionally, frost sus-
ceptibility of soils can be fairly accurately predicted from the results of
grain-size analysis. The standard grain-size analysis test determines
the relative proportions of different grain sizes as they are distributed
among certain size ranges.
Grain-size analysis of soils containing relatively large particles is
accomplished using sieves. A sieve is similar to a cook's flour sifter. It is
an apparatus having openings of equal size and shape through which
grains smaller than the size of the opening will pass, while larger grains
are retained. Obviously, a sieve can be used to separate soil grains in a
sample into two groups: one containing grains smaller than the size of
the sieve opening and the other containing larger grains. By passing the
sample downward through a series of sieves, each of decreasing size
openings, the grains can be separated into multiple groups, each of
which contains grains in a particular size range. The various sieve sizes
are usually specified and are standardized.
Soils with small grain sizes cannot generally be analyzed using
sieves, because of the very small size of sieve opening that would be re-
quired and the difficulty of getting such small particles to pass through.

INTRODUCTION

117