Environmental Engineering Reference
In-Depth Information
153. Atta, A.M., Mansour, R., Abdou, M.I. and Sayed, A.M. (2004) Epoxy resins from rosin
acids: synthesis and characterization.
Polymers for Advanced Technologies
,
15
(9),
514-522.
154. Jin, J.F., Chen, Y.L., Wang, D.N.
et al.
(2002) Structures and physical properties of rigid
polyurethane foam prepared with rosin-based polyol.
Journal of Applied Polymer Science
,
84
(3), 598-604.
155. Atta, A.M., El-Saeed, S.M. and Farag, R.K. (2006) New vinyl ester resins based on rosin
for coating applications.
Reactive & Functional Polymers
,
66
(12), 1596-1608.
156. Atta, A.M., Elsaeed, A.M., Farag, R.K. and El-Saeed, S.M. (2007) Synthesis of unsatu-
rated polyester resins based on rosin acrylic acid adduct for coating applications.
Reactive
& Functional Polymers
,
67
(6), 549-563.
157. Wang, J., Wilbon, P.A., Yao, K.
et al
. (2012)
Rosin-derived Polymers and their Progress in
Controlled Polymerisation
. Rosin-based Chemicals and Polymers. Smithers Rapra
Technology Ltd, Shropshire. pp. 85-128.
158. Zheng, Y., Yao, K., Lee, J.
et al.
(2010) Well-defined renewable polymers derived from
gum rosin.
Macromolecules
,
43
(14), 5922-5924.
159. Wang, J., Ya, K., Korich, A.L.
et al.
(2011) Combining renewable gum rosin and lignin:
towards hydrophobic polymer composites by controlled polymerization.
Journal of
Polymer Science Part A—Polymer Chemistry
,
49
(17), 3728-3738.
160. Wilbon, P.A., Zheng, Y., Yao, K. and Tang, C. (2010) Renewable rosin acid-degradable
caprolactone block copolymers by atom transfer radical polymerization and ring-opening
polymerization.
Macromolecules
,
43
(21), 8747-8754.
161. Wang, J., Chen, Y.P., Yao, K.
et al.
(2012) Robust antimicrobial compounds and polymers
derived from natural resin acids.
Chemical Communications
,
48
(6), 916-918.
162. Yao, K., Wang, J., Zhang, W.
et al.
(2011) Degradable rosin-ester-caprolactone graft copol-
ymers.
Biomacromolecules
,
12
(6), 2171-2177.
163. Pizzi, A. (2008) Tannins: major sources, properties and applications, in
Monomers,
Polymers and Composites from Renewable Resources
(eds M.N. Belgacem and A.
Gandini), Elsevier Ltd, London, pp. 179-200.
164. Pizzi, A. (1980) Tannin-based adhesives.
Journal of Macromolecular Science—Reviews in
Macromolecular Chemistry and Physics
,
C18
(2), 247-315.
165. Pizzi, A. (1982) Condensed tannins for adhesives.
Industrial & Engineering Chemistry
Product Research and Development
,
21
(3), 359-369.
166. Hergert, H.L. (1989) Condensed tannins in adhesives introduction and historical perspec-
tives.
ACS Symposium Series.
,
385
, 155-171.
167. Simon, C. and Pizzi, A. (2002) Tannin-based adhesives.
Actualite Chimique
,
11-12
,
15-16.
168. Tondi, G., Pizzi, A. and Olives, R. (2008) Natural tannin-based rigid foams as insulation
for doors and wall panels.
Maderas Ciencia y Tecnologia
,
10
(3), 219-227.
169. Meikleham, N.E. and Pizzi, A. (1994) Acid-catalyzed and alkali-catalyzed tannin-based
rigid foams.
Journal of Applied Polymer Science
,
53
(11), 1547-1556.
170. Tondi, G. and Pizzi, A. (2009) Tannin-based rigid foams: Characterization and modifica-
tion.
Industrial Crops and Products
,
29
(2-3), 356-363.
171. Tondi, G., Zhao, W., Pizzi, A.
et al.
(2009) Tannin-based rigid foams: a survey of chemical
and physical properties.
Bioresource Technology
,
100
(21), 5162-5169.
172. Tondi, G., Fierro, V., Pizzi, A. and Celzard, A. (2009) Tannin-based carbon foams.
Carbon
,
47
(6), 1480-1492.