Agriculture Reference
In-Depth Information
[40]
Kasuya, F., Glarborg, P., Johnsson, J.E.& Dam-Johansen, K., (1995),“The thermal
DeNO
x
process:influence of partial pressures and temperature”,
Chemical Engineering
Science
,
50
, 1455-1466
[41]
Khruslova, T.N.&Kolomiets, D.M. (1974). “Use of fodder yeast slops from Alcohol
Factories for irrigation and as fertilizer for seedling”,
Ferment. Spirit. Prom
., 440-42.
[42]
Kilpinen, P.&Hupa, M. (1991). “Homogeneous N
2
O chemistry at fluidized bed
combustion conditions-a kinetic modelling study”,
Combustion and Flame
,
85
, 94-104.
[43]
Knobig, T. et al. (1997). “Are measurements in small scale units representative of the
performance of large scale combustors with circulating fluidized beds?”, VDI Report
1314,
Association of German Engineers
, 281-296.
[44]
Kouprianov, V. I. &Permachart, W. (2003). “Emissions from a conical FBC fired with
biomass fuel”,
Applied Energy
,
74
, 383-392.
[45]
Kristenen, P.G., Glargorg, P.& Dam-Johansen, K. (1996). “Nitrogen chemistry during
burnout in fuel-staged combustion”,
Combustion and Flame
,
107
, 211-222.
[46]
Kujala, P. (1979). “Distillery Fuel Savings by Efficient Molasses Processing and
Stillage Utilisation”, Sugar Y Azuzar, 13-16.
[47]
Kuprianov, V. I., Janvijitsakul, A. &Permchart,W. (2006). “Co-firing of sugar cane
begasse with rice husk in a conical fluidized bed combustor”,
Fuel
,
85
, 434-442.
[48]
Leckner, B.&Karlsson, M. (1993). “Gaseous Emissions from Circulating Fluidized Bed
Combustion of Wood”,
Biomass and Bioenergy
,
4
, 5, 379-389.
[49]
Leckner, B. &Amand, L.E. (1987). “Emissions form a circulating and a stationary
fluidized bed boiler: A comparison”, Proceedings of the 9
th
International Conference on
FBC,
Boston
,
2
, 891-897.
[50]
Lin, W.& Dam-Johansen, K. (1999),” Sulphur capture by alkali content of straw during
co-firing with coal in FBC”, In: Li BQ, Liu ZY, editors. Prospects for coal science in
the 21st century; 1421-1424.
[51]
Mahmoudi, S., Baeyens, J. & Seville, P. K. (2010). “NO
x
formation and selective non-
catalytic reduction (SNCR) in a fluidized bed combustor of Biomass”,
Biomass and
Bioenergy
,
34
, 1393-1409.
[52]
Miller, J.A.,& Brown, C. T. (1989). “Mechanism and modelling of nitrogen chemistry
in combustion”,
Progress in Energy and Combustion Science
,
15
, 287-338.
[53]
Montanani, F.N. (1954). “Ingenieria Sanitaria”,
Mexico
,
8
, 21-43.
[54]
Monteiro, C.E. (1975). “Brazilian Experience with the Disposal of Waste Water from
the Cane sugar and Alcohol Industry”,
Process Biochemistry
, 33-41.
[55]
Moritomi, H. et al., (1991). “NO
x
formation mechanism of circulating fluidized bed
combustion”,
Proceedings of the 11
th
International Conference on FBC
, Montreal,
2
,
1005-1011.
[56]
Nelson, P.F., Buchley, A. N. & Kelly, M. D. (1992). “Functional forms of nitrogen in
coals and the release of coal nitrogen as NO
x
precursors (HCN and NH3)”, In 24
th
Symposium on Combustion, The Combustion Institute, Pittsburgh, 1259-1267.
[57]
Niksa, S.& Cho, S. (1996). “Conversion of Fuel-Nitrogen in the primary zones of
pulverized coal flames”,
Energy and Fuels
,
10
, 463-473.
[58]
Nilsson, M. (1981). “Energy Recovery from Distillery Wastes”, from Alfa-Laval A.B.,
International Sugar Journal, September
,
83
, Issue 993, 259-261.
[59]
Nowak, W. (2003). “Clean coal fluidized bed technology in Poland”,
Applied Energy
,
74
, 405-413.