In-plane bending of beams - The Behaviour and Design of Steel Structures to EC3 - page 226

4. Norris, C.H., Wilbur, J.B., and Utku, S. (1976) Elementary Structural Analysis ,
3rd edition, McGraw-Hill, NewYork.
5. Harrison, H.B. (1973) Computer Methods in Structural Analysis , Prentice-Hall,
Englewood Cliffs, New Jersey.
6. Harrison, H.B. (1990) Structural Analysis and Design, Parts 1 and 2 , 2nd edition,
Pergamon Press, Oxford.
7. Ghali, A., Neville, A.M., and Brown, T.G. (1997) Structural Analysis - A Unified
Classical and Matrix Approach , 5th edition, Routledge, Oxford.
8. Coates, R.C., Coutie, M.G., and Kong, F.K. (1990) Structural Analysis , 3rd edition,
Van Nostrand Reinhold (UK),Wokingham.
9. British Standards Institution (2005) BS4-1:2005 Structural Steel Sections - Part1:
Specification for hot-rolled sections , BSI, London.
10. Bridge,R.Q.andTrahair,N.S.(1981)Bending,shear,andtorsionofthin-walledbeams,
Steel Construction ,Australian Institute of Steel Construction, 15 (1), pp. 2-18.
11. Hancock, G.J. and Harrison, H.B. (1972) A general method of analysis of stresses
in thin-walled sections with open and closed parts, Civil Engineering Transactions ,
Institution of Engineers,Australia, CE14 , No. 2, pp. 181-8.
12. Papangelis, J.P. and Hancock, G.J. (1995) THIN-WALL - Cross-section Analysis
and Finite Strip Buckling Analysis of Thin-Walled Structures , Centre for Advanced
Structural Engineering, University of Sydney.
13. Timoshenko,S.P.andGoodier,J.N.(1970) Theory of Elasticity ,3rdedition,McGraw-
Hill, NewYork.
14. Winter, G. (1940) Stress distribution in and equivalent width of flanges of wide, thin-
walledsteelbeams, TechnicalNote784 ,NationalAdvisoryCommitteeforAeronautics.
15. Abdel-Sayed, G. (1969) Effective width of steel deck-plates in bridges, Journal of the
Structural Division , ASCE , 95 , No. ST7, pp. 1459-74.
16. Malcolm, D.J. and Redwood, R.G. (1970) Shear lag in stiffened box girders, Journal
of the Structural Division, ASCE , 96 , No. ST7, pp. 1403-19.
17. Kristek, V. (1983) Shear lag in box girders, Plated Structures. Stability and Strength ,
(ed. R. Narayanan),Applied Science Publishers, London, pp. 165-94.
18. Baker, J.F. and Heyman, J. (1969) Plastic Design of Frames - 1. Fundamentals,
Cambridge University Press, Cambridge.
19. Heyman, J. (1971) Plastic Design of Frames - 2. Applications , Cambridge University
Press, Cambridge.
20. Horne,M.R.(1978) Plastic Theory of Structures ,2ndedition,PergamonPress,Oxford.
21. Neal, B.G. (1977) The Plastic Methods of Structural Analysis , 3rd edition, Chapman
and Hall, London.
22. Beedle, L.S. (1958) Plastic Design of Steel Frames , JohnWiley, NewYork.
23. Horne, M.R. and Morris, L.J. (1981) Plastic Design of Low-rise frames , Granada,
London.
24. Davies, J.M. and Brown, B.A. (1996) Plastic Design to BS5950 , Blackwell Science
Ltd, Oxford.
25. British Standards Institution (2006) E υρ o χ o δε 3- Design of Steel Structures - Part
1-5: Plated structural elements , BSI, London.