Composites - The Polysiloxanes - page 244

H. K., Eds. Materials Research Society: Pittsburgh, PA, 1992; Vol. 274,
pp 77-84.
115. Wang, S.; Xu, P.; Mark, J. E., Shear and Biaxial Extension Measurements of
Reinforcement from In-Situ Precipitated Silica. Rubber Chem. Technol . 1991 ,
64 , 746-759.
116. Wang, S.-B.; Mark, J. E., In-Situ Precipitation of Reinforcing Titania Fillers.
Polym. Bull. 1987 , 17 , 271-277.
117. Kraus, G., Reinforcement of Elastomers . Interscience: New York, 1965.
118. Wen, J.; Mark, J. E., Precipitation of Silica-Titania Mixed-Oxide Fillers into
Poly(dimethylsiloxane) Networks. Rubber Chem. Technol . 1994 , 67 , 806-819.
119. Burnside, S. D.; Giannelis, E. P., Synthesis and Properties of New
Poly(dimethylsiloxane) Nanocomposites. Chem. Mater . 1995 , 7 , 1597-1600.
120. Wen, J.; Mark, J. E.; Fitzgerald, J. J., Unimodal, Bimodal, and Filled
Poly(dimethylsiloxane) Elastomers Under Cyclic Stress at Elevated Tempera-
tures. J. Macromol. Sci., Macromol. Rep . 1994 , 31 , 429-438.
121. Sohoni, G. B.; Mark, J. E., Thermal Stability of In-Situ Filled Siloxane Elasto-
mers. J. Appl. Polym. Sci . 1992 , 45 , 1763 -1775.
122. Mora-Barrantes, I.; Rodriguez, A.; Ibarra, I.; Gonzales, L.; Valentin, J. L.,
Overcoming the Disadvantages of Fumed Silica as Filler in Composites.
J. Mater. Chem . 2011 , 21 , 7381-7392.
123. Aranguren, M. I., Crystallization of Polydimethylsiloxane: Effect of Silica
Filler and Curing. Polymer 1998 , 39 , 4897-4903.
124. Pethrick, R. A.; Dawkins, J. V., Modern Techniques for Polymer Characterization .
John Wiley & Sons: New York, 1999.
125. Roe, R.-J., Methods of X-Ray and Neutron Scattering in Polymer Science . Oxford
University Press: Oxford, 2000.
126. Sperling, L. H., Introduction to Physical Polymer Science , 3rd ed. Wiley Inter-
science: New York, 2001.
127. Wignall, G. D., Small-Angle-Neutron-Scattering Characterization of Poly-
mers. In Physical Properties of Polymers , 3rd ed.; Mark, J. E.; Ngai, K. L.; Graess-
ley, W. W.; Mandelkern, L.; Samulski, E. T.; Koenig, J. L.; Wignall, G. D., Eds.
Cambridge University Press: Cambridge, 2004; pp 424-511.
128. Serbescu, A.; Saalwachter, K., Particle-Induced Network Formation in Linear
PDMS Filled with Silica. Polymer 2009 , 50 , 5434-5442.
129. Fu, F.-S.; Mark, J. E., Elastomer Reinforcement from a Glassy Polymer Polym-
erized In-Situ. J. Polym. Sci., Polym. Phys. Ed . 1988 , 26 , 2229-2235.
130. Fu, F.-S.; Mark, J. E., Polystyrene-Polyisobutylene Network Composites from
In-Situ Polymerizations. J. Appl. Polym. Sci . 1989 , 37 , 2757-2768.
131. Akcora, P.; Kumar, S. K.; Moll, J.; Lewis, S.; Schadler, L. S.; Li, Y.; Benicewicz,
B. C.; Sandy, A.; Narayanan, S.; Ilavsky, J.; Thiyagarajan, P.; Colby, R. H.; Doug-
las, J. F., “Gel-Like” Mechanical Reinforcement in Polymer Nanocomposite
Melts. Macromolecules 2010 , 43 , 1003-1010.
132. Sur, G. S.; Mark, J. E., Grafting of Polystyrene onto the Cross Links in a Silox-
ane Elastomer. Eur. Polym. J . 1988 , 24 , 913-916.
133. Sur, G. S.; Mark, J. E., Grafting of Polymer onto Filler Particles Used to Rein-
force an Elastomer. Polym. Bull. 1988 , 20 , 131-136.
134. Mark, J. E., Physical Properties of Polymers Handbook . Springer-Verlag: New
York , 1996.
135. Brandrup, J.; Immergut, E. H.; Grulke, E. A., Polymer Handbook , 4th ed. Wiley:
New York, 1999.