SYSTEM ANALYSIS USING RESPONSE SURFACE MODELING - Advanced Signal Integrity for High-Speed Digital Design - page 629

Montgomery, Douglas C., 2005, Design and Analysis of Experiments , 6th ed., Wiley,
Hoboken, NJ.
Mutnuray, Bhyrav, et al., 2006, Genetic algorithms with scalable I/O macromodels to
find the worst case corner in high-speed server electrical analysis, Proceedings of the
2006 IEEE Symposium on Electrical Performance of Electronic Packaging , Oct., pp.
73-76.
Myers, Raymond H., and Douglas C. Montomery, 2002, Response Surface Methodology ,
2nd ed., Wiley, Hoboken, NJ.
Norman, Adam, et al., 2003, Application of design of experiments (DOE) meth-
ods to high-speed interconnect validation, Proceedings of the 12th IEEE Topical
Meeting on Electrical Performance of Electronic Packaging , Princeton, NJ, Oct.,
pp. 223-226.
SAS Institute, 2007, JMP  Release 7 Statistics and Graphics Guide , SAS, Cary, NC.
Steppan, Dave, Joachim Werner, and Bob Yeater, 1998, Essential Regression and Exper-
imental Design , http://www.jowerner.homepage.t-online.de/download.htm.

PROBLEMS

14-1 Re-fit the eye height response surface model presented in this chapter
with nonsignificant parameters removed, and compare the results against
the original model presented in the text.
14-2 Re-fit the eye width response surface model presented in this chapter with
nonsignificant parameters removed, and compare the results against the
original model presented in the text.
14-3 Create a response surface model for the differential impedance of a
differential pair on a printed circuit using the cross section shown in
Figure 14-11 and the data in Table 14-10.

e r

h 2

t

w s w

h 1

Figure 14-11 PCB cross section for Problem 14-3.