Enhancement of Physical and Mechanical Properties of Sugar Palm Fiber via Vacuum Resin Impregnation - Advanced Materials for Agriculture, Food and Environmental Safety - page 141

16. Z. Leman, S.M. Sapuan, M.R. Ishak, and M.M.H.M. Ahmad, Pre-treatment
by water retting to improve the interfacial bonding strength of sugar palm
i bre reinforced epoxy composite, Polym. Renew. Re. , Vol. 1, pp. 1-12, 2010.
17. M.R. Ishak, S.M. Sapuan, Z. Leman, M.Z.A. Rahman, and U.M.K. Anwar,
Characterization of sugar palm ( Arenga pinnata ) i bres: Tensile and thermal
properties, J. h erm. Anal. Calorim. , DOI: 10.1007/s10973-011-1785-1, 2011.
18. S. Mishra, M. Misra, S.S. Tripathy, S.K. Nayak, and A.K. Mohanty, Potentiality
of pineapple leaf i bre as reinforcement in PALF-polyester composite: Surface
modii cation and mechanical performance, J. Reinf. Plast. Compos. , Vol. 20,
pp. 322-334, 2001.
19. H. Chen, M. Miao, and X. Ding, Inl uence of moisture absorption on the
interfacial strength of bamboo/vinyl ester composites, Comp. Part A , Vol. 40,
pp. 2013-2019, 2009.
20. M.J. John, and S. h omas, Bioi bres and biocomposites, Carbohydrate
Polymers , Vol. 71, pp. 343-364, 2008.

21. M.M. Rahman, and M.A. Khan, Surface treatment of coir ( Cocos nucifera )

i bers and its inl uence on the i bers' physico-mechanical properties, Comp.
Sci. Technol. , Vol. 67, pp. 2369-2376, 2007.

22. W.L. Bradley, and T.S. Grant, h e ef ect of the moisture absorption on the

interfacial strength of polymeric matrix composites, J. Mater. Sci. , Vol. 30,
pp. 5537-5542, 1995.

23. H.M. Akil, M.F. Omar, A.A.M. Mazuki, S. Sai ee, Z.A.M. Ishak, and A. Abu

Bakar, Kenaf i ber reinforced composites: A review, Mater. Design , Vol. 32,
pp. 4107-4121, 2011.

24. S. Ramarad, Preparation and properties of kenaf bast i ber i lled (plasticized)

poly(lactic acid) composites, MSc h esis, Universiti Sains Malaysia, 2008.

25. C.A.S. Hill, “Impregnation modii cation,” in: Wood Modii cation: Chemical,

h ermal and Other Processes , C.A.S. Hill, ed., John Wiley & Sons Ltd., West
Sussex, pp. 149-173, 2006.

26. C.A.S. Hill, “Modifying the properties of wood,” in: Wood Modii cation:

Chemical, h ermal and Other Processes , C.A.S. Hill, ed., John Wiley & Sons
Ltd., West Sussex, pp. 19-44, 2006.

27. J.S. Robbins, W.D. Mockel, and C.J. Lyons, Average molecular weight deter-

mination of a polyester by NIR spectroscopy, ISA Transactions , Vol. 33,
pp. 377-380, 1994.

28. A.J. Stamm, and R.M. Seborg, Resin treated wood - impreg, USDA Forest

Service, Forest Products Laboratory, Report No. 1360, 1962.

29. R.R. Ibach, and W.D. Ellis, “Lumen modii cations,” in: Handbook of Wood

Chemistry and Wood Composites , W.R.M. Rowell, ed., CRC Press, Boca
Raton, pp. 421-445, 2005.

30. M. Deka, P. Das, and C.N. Saikia, Studies on dimensional stability, thermal

degradation and termite resistant properties of bamboo ( Bambusa tulda
Roxb.) treated with thermosetting resins, Bamboo Rattan , Vol. 2, pp. 29-41,
2003.