References - Rock Mechanics Based on an Anisotropic Jointed Rock Model - page 856

Stille, H.; Palmström, A.: Classification as a tool in rock engineering. Tunn. Undergr. Sp. Tech. 18 (3),
2003.
Stimpson, B.: A rapid field method for recording joint roughness profiles. Int. J. Rock Mech. Min. Sci. &
Geomech. Abstr. 19, 345 - 346, 1982.
Stini, J.: Technische Gesteinskunde. Springer: Wien, 1929.
Stini, I.: Tunnelbaugeologie: Die geologischen Grundlagen des Stollen- und Tunnelbaues. Springer: Wien,
1950.
Stormont, J. C.; Howard, C. L.; Daemen, J. J. K.: In situ measurements of rock salt permeability changes
due to nearby excavation. Sandia Report SAND 90-3134, Albuquerque, 1991.
Sture, S.; Desai, C. S.: Fluid cushion truly triaxial or multiaxial testing device. Geotech. Testing J. 2, 20 -
33, 1979.
Sugawara, K.; Obara, Y.: Measurement of in-situ rock stress by hemispherical-ended borehole technique.
Int. J. Min. Sci. and Technology 3, 287 - 300, 1986.
Sugawara, K.; Obara, Y.; Okamura, H.; Wang, Y.: The determination of the complete state of stress in
rock by the measurement of strains on a hemispherical borehole bottom. J. Min. Metall. Inst. Japan
101, 277 - 282, 1985.
Sulukcu, S.; Ulusay, R.: Evaluation of the block punch index test with particular reference to the size
effect, failure mechanism and its effectiveness in predicting rock strength. Int. J. Rock Mech. Min.
Sci. 38, 1091 - 1111, 2001.
Sun, Z.; Gerrard, C.; Stephansson, O.: Rock joint compliance tests for compression and shear loads. Int.
J. Rock Mech. Min. Sci. & Geomech. Abstr. 22, 197 - 213, 1985.
Swan, G.: Determination of stiffness and other joint properties from roughness measurements. Rock
Mech. Rock Eng. 16, 19 - 38, 1983.
Swolfs, H. S.; Kibler, J. D.: A note on the Goodman Jack. Rock Mech. 15, 57 - 66, 1982.
Taheri, A.: Study on shear strength and deformability properties of rock masses by in-situ and laboratory
testing methods. Ph. D. Thesis, Yokohama National University, 2008.
Taheri, A.; Tani, K.: Development of an apparatus for down-hole triaxial tests in a rock mass. Int.
J. Rock Mech. Min. Sci. 45, 800 - 806, 2008a.
Taheri, A.; Tani, K.: Proposal of a new multiple-step loading triaxial compression testing method. In:
Proc. 5 th Asian Rock Mech. Symp. (ARMS), Vol. 1, Teheran, 2008b.
Takahashi, M.; Koide, H.: Effect of the intermediate principal stress on strength and deformation beha-
vior of sedimentary rocks at the depth shallower than 2000 m. In: Proc. ISRM Symp. Rock at Great
Depth, Vol. 1, Pau, 19 - 26, 1989.
Takano, M.; Shidomoto, Y.: Deformation test on mudstone enclosed in a foundation by means of tube-
deformeter. In: Proc. 1 st ISRM Congr., Vol. 1, Lisbon, 1966.
Talesnick, M. L.; Lee, M. Y.; Haimson, B. C.: On the determination of elastic material parameters for
transverse isotropic rocks from a single test specimen. Rock Mech. Rock Eng. 28, 17 - 36, 1995.
Talesnick, M. L.; Ringel, M.: Completing the hollow cylinder methology for testing of transversely iso-
tropic rocks: Torsion testing. Int. J. Rock Mech. Min. Sci. 36, 627 - 639, 1999.
Tang, C. A.; Tham, L. G.; Lee, P. K. K.; Yang, T. H.; Li, L. C.: Coupled analysis of flow, stress and
damage (FSD) in rock failure. Int. J. Rock Mech. Min. Sci. 39, 477 - 489, 2002.
Tani, K.: Proposal of new in-situ test methods to investigate strength and deformation characteristics
of rock masses. In: Proc. 2 nd Int. Symp. Pre-failure Deformation Characteristics of Geomaterials,
Torino, 1999.
Tegelkamp, M.; Wittke-Gattermann, P.; Züchner, F.: S-Bahn Stuttgart - Tunnelvortrieb im wasserführen-
den Gebirge unter dem Stuttgarter Flughafen ohne Grundwasserabsenkung. Taschenbuch für den
Tunnelbau 2001, 21 - 40, Glückauf: Essen, 2000.
Terzaghi, K.: Rock defects and loads on tunnel supports. Rock Tunnelling with Steel Supports, Youngs-
town, 1946.