References - Rock Mechanics Based on an Anisotropic Jointed Rock Model - page 845

Maini, Y. N.; Noorishad, J.; Sharp, J.: Theoretical and field considerations on the determination of in
situ hydraulic parameters in fractured rock. In: Proc. Symp. Perlocation Through Fissured Rock,
Stuttgart, 1972.
Majdi, A.; Amini, M.: Effects of geostructural weaknesses on flexural toppling failure based on princip-
les of solid and fracture mechanics. In Proc. 5 th Asian Rock Mech. Symp. (ARMS), Teheran, 2008.
Maksimovic, M.: New description of shear strength for rock joints. Rock Mech. Rock Eng. 25, 275 - 284,
1992.
Maksimovic, M.: The shear strength components of a rough rock joint. Int. J. Rock Mech. Min. Sci. &
Geomech. Abstr. 33, 769 - 783, 1996.
Makurat, A.: The effect of shear displacement on the permeability of natural rough joints. Hydrogeology
of rocks of low permeability. In: Proc. 17 th Int. Congr. Hydrogeology, Tucson, 1985.
Malama, B., Kulatilake, P. H. S. W.: Models for normal fracture deformation under compressive loading.
Int. J. Rock Mech. Min. Sci. 40, 893 - 901, 2003.
Marcotte, D.; Henry, E.: Automatic joint set clustering using a mixture of bivariate normal distributions.
Int. J. Rock Mech. Min. Sci. 39, 323 - 334, 2002.
Mardia, K. W.: Statistics of directional data. Academic Press: London, 1972.
Mathis, J. I.: Development and verification of a three-dimensional rock joint model. Lulea University of
Technology, Sweden, 1988.
Mauldon, M.: Rotational failure modes in jointed rock: A generalization of block theory. Ph. D. Thesis,
University of California, Berkeley, 1992.
Mauldon, M.: Estimating mean fracture trace length and density from observations in convex windows.
Rock Mech. Rock Eng. 31, 201 - 216, 1998.
Mauldon, M.; Goodman, R. E.: Rotational kinematics and equilibrium of blocks in a rock mass. Int.
J. Rock Mech. Min. Sci. & Geomech. Abstr. 27, 291 - 301, 1990.
Mauldon, M.; Goodman, R. E.: Vector analysis of keyblock rotations. J. Geotech. Eng. 122, 976 - 987,
1996.
Mc Cutchen, W. R.: Some elements of a theory for in situ stress. Int. J. Rock Mech. Min. Sci. & Geo-
mech. Abstr. 19, 201 - 203, 1982.
Mc Lamore, R.; Gray, K. E.: The mechanical behavior of anisotropic sedimentary rocks. J. Eng. Ind.
Trans. ASME 89, 62 - 73, 1967.
Mc Tigue, D. F.; Mei, C. C.: Gravity induced stresses near topography of small slopes. J. Geophys. Res.
86, 9268 - 9278, 1981.
Mc Tigue, D. F.; Mei, C. C.: Gravity induced stresses near axisymmetric topography of small slopes. Int.
J. Num. & Anal. Meth. Geomech. 11, 257 - 268, 1987.
Mc Williams, P. C.; Kerkering, J. C.; Miller, S. M.: Estimation of shear strength using fractals as a measu-
re of rock fracture roughness. U. S. Bureau of Mines RI 9447, 1993.
Mederer, J.: Über den Einfluß von Wasser und wäßrigen Lösungen auf die Zerfallsstabilität ausgewählter
pelitischer Sedimente der Unterkreide in Südost-Niedersachsen. Dissertation, Universität München,
1985.
Menard, L.: Anwendung des Pressiometerverfahrens zur Untersuchung von Gebirgen. Felsmechanik und
Ingenieurgeologie IV/2, 160 - 171, 1966.
Menard, L.; Beyrer, H.: Das “in-situ” Baugrundprüfverfahren Pressiometer Menard. Brücke und Straße
20(4), 108 - 113, 1968.
Merrill, R. H.: Three component borehole deformation gauge for determining the stress in rock. U. S.
Bureau of Mines, RI 7015, 1967.
Metz, K.: Lehrbuch der Tektonischen Geologie. Springer: Wien, 1967.
Michalakopoulos, T. N.; Anagnostou, V. G.; Bassanou, M. E.; Panagiotou, G. N.: The influence of steel
styli hardness on the Cerchar abrasiveness index value. Int. J. Rock Mech. Min. Sci. 43, 321 - 327,
2006.