Environmental Engineering Reference
In-Depth Information
[15] H. Dumitrescu, M. Alexandrescu and A. Alexandrescu, Aerodynamic Analysis of a
Straight-Bladed Darrieus Rotor including Dynamic-Stall Effects, Rev. Roum. Sci. Techn,
pp 99-113, Bucarest, Roumania 2005
[16] J. Dütting, Untersuchungen über das Startverhalten vonWindrotorenmit vertikaler Ach-
se, Dissertation der Universität Bremen, Germany, 1987
[17] L. Eckert et al., Analyse und Nachweis der 50 kW-Windenergieanlage (Typ Darrieus), In-
terner Bericht, Dornier GmbH, MEB 55/90, 1990
[18] C. S. Ferreira, The near wake of the VAWT, PhD Thesis, Technical University Delft, The
Netherlands, 2009
[19] FloWind Corporation, Final Project Report: High-Energy Rotor Development, Test and
Evaluation, Sandia National Laboratories, Sand96-2205, Albuquerque, NM, 1996
[20] FLUENT Inc., FLUENT 5 User's Guide, Fluent Inc., Lebanon, NH, 1998
[21] K. Freudenreich, K. Kaiser, A. P. Schaffarczyk, H. Winkler und B. Stahl, Reynolds-Number
and Roughness Effects on Thick Airfoils for Wind Turbines, Wind Engineering, 5, pp 529-
546, 2004
[22] A. Fritzsche et al., Auslegung einer Windenergieanlage mit senkrechter Drehachse im
Leistungsbereich 350-500 kW, Dornier GmbH, Friedrichshafen, 1991
[23] R. E. Froude, On the Part Played in Propulsion by Differences in Fluid Pressure, Trans.
Inst. Nav. Arch., 390, 1889
[24] R. Gasch, J. Twele (Hrsg.), Windkraftanlagen, 6. Auflage, Vieweg+Teubner, Stuttgart, 2010
[25] M. Gaunå, Stig Øye und R. Mikkelsen, Theory and Design of Flow driven Vehicles Using
Rotors for Energy Conversion, Proc. EWEC, Marseille, France, 2009
[26] H. Glauert, The elements of airfoil and airscrew theory, 2nd Ed., Cambridge University
Press, UK, 1993
[27] M. O. L. Hansen, N. N. Sørensen, R. G. J. Flay, Effect of placing a Diffuser around a Wind
Turbine, Proc. EWEC, Nice, France, 1999
[28] M. O. L. Hansen, Aerodynamics of Wind Turbines James & James (Science Publishers)
Ltd, London (UK), 2000
[29] M. O. L. Hansen and D.N. Sørensen, CFD Model for Vertical Axis Wind-Turbine, Proc.
EWEC, Kopenhagen, Denmark, 2001
[30] M. O. L. Hansen and J. Johannson, Tip Studies using CFD and comparison with Tip Loss
Models, Proc. EAWE Conference The Science of making Torque from Wind, Delft, The
Netherlands, 2004
[31] A. Haris, The variation in cost of energy with size and rated power for Vertical Axis Wind-
Turbine, Proc. Brit. Windenergy Conf., 1991
[32] R. Harrison, E. Hau und H. Snel, Large Wind Turbines - Design and Economics, John
Wiley, 2000
[33] E. Hau, Windkraftanlagen, 4. Auflage, J. Springer, Berlin, 2008
[34] J. V. Healey, Tandem-Disk Theory - With Particular Reference to Vertical Axis Wind Tur-
bines, J. Energy 4, pp 251-254, 1981
[35] G. Heidelberg und J. Krömer, Windkraftanlage H-Rotor: Erfahrungen, Aktuelles und Aus-
blick, Husumer Windenergietage, Husum, Germany, 1993
