Information Technology Reference
In-Depth Information
Figure 119:
To program the IR blaster manually, click an on-
screen button, then press the corresponding button on the phys-
ical remote. It helps if you put your remote's sensor close to the
sensor on the EyeTV and press the button repeatedly.
Aim the set-top box remote at the front of the EyeTV. Click an onscreen button
(start with the 1, for example), and press the corresponding button on your re-
mote. This process is finicky, and you have only a few seconds to train each but-
ton.Irecommend clicking theonscreen button,thenrepeatedly pressing there-
mote button while waving the front of the remote about an inch in front of the
Eye TV HD. When a button is learned, a green checkbox appears on it in the
Setup Assistant. Be patient, it may take several attempts for each button. When
alltheonscreennumbershavegreencheckboxes,pouryourselfadrinkandclick
Next.
On the next screen, you're given the opportunity to test each of the buttons you
set up in the previous screen. Turn on your set-top box and try each button to
see if it works. Move your IR blaster around if you need to.
11. Thenext screen letsyoufine-tune thecodesthattheIRblaster putsout.Choose
whether you need to put zeroes in front of channel numbers, press a button be-
foreentering achannel number, orpressaconfirmation buttontochange chan-
nels. If you're not sure, play with your set-top box's remote to see what works.
Click Next to continue.
