Environmental Engineering Reference
In-Depth Information
Kodama, A., Andou, K., Ohkura, M., Goto, M. and Hirose, T. (2003) Process configurations
and their performance estimations of an adsorptive desiccant cooling cycle for use in a damp
climate.
Journal of Chemical Engineering of Japan
, 36, 819-826.
Kodama, A., Hirayama, T., Goto, M., Hirose, T. and Critoph, R. (2001) The use of psychro-
metric charts for the optimization of a thermal swing desiccant wheel.
Applied Thermal
Engineering
, 21, 1657-1674.
Kodama, A., Watanabe, N., Hirose, T., Goto, M. and Okano, H. (2005) Performance of a
multipass honeycomb adsorber regenerated by a direct hot water heating.
Adsorption
, 11,
603-608.
Kolokotroni, M. and Aronis, A. (1999) Cooling-energy reduction in air-conditioned offices by
using night ventilation.
Applied Energy
, 63, 241-253.
Kribus, A., Kaftori, D., Mittelman, G., Hirshfeld, A., Flitsanov, Y. and Dayan, A. (2006)
A miniature concentrating photovoltaic and thermal system.
Energy Conversion and
Management
, 47, 3582-3590.
La, D., Dai, Y.J., Li, Y., Wang, R.Z. and Ge, T.Z. (2010) Technical development of rotary
desiccant dehumidification and air conditioning: a review.
Renewable and Sustainable Energy
Review
, 14, 130-147.
Lin, M., Oki, T., Holloway, T., Streets, D.G., Bengtsson, M. and Kanae, S. (2008) Long-
term transport of acidifying in East Asia-Part I: Model evaluation and sensitivity studies.
Atmospheric Environment
, 42, 5939-5955.
Liu, X.H., Geng, K.C., Lin, B.R. and Jiang, Y. (2004) Combined cogeneration and liquid-
desiccant system applied in a demonstration building,
Energy and Buildings
, 36, 945-953.
Liu, X.H., Yi, X.Q. and Jiang, Y. (2011) Mass transfer comparison of two commonly used
liquid desiccants: LiBr and LiCl aqueous solutions.
Energy Conversion and Management
,
52, 180-190.
Low, M. (1960) Kinetics of chemisorption of gases on solids.
Chemical Reviews Journal
, 60,
267-312.
Ma, Q., Wang, R.Z., Dai, Y.J. and Zhai, X.Q. (2006) Performance analysis on a hybrid air-
conditioning system of a green building.
Energy and Buildings
, 38, 447-453.
Majumdar, P. and Worek, W.M. (1989) Performance of an open-cycle desiccant cooling system
using advanced desiccant matrices.
Heat Recovery System and CHP
, 9, 299-311.
Mavroudaki, P., Beggs, C.B., Sleigh, P.A. and Halliday, S.P. (2002) The potential for solar
powered single-stage desiccant cooling in southern Europe.
Applied Thermal Engineering
,
22, 1129-1140.
Mei, L. and Dai, Y.J. (2008) A technical review on use of liquid-desiccant dehumidification for
air-conditioning application.
Renewable and Sustainable Energy Review
, 12, 662-89.
Mesquita, L.C.S., Harrison, S.J. and Thomey, D. (2006) Modeling of heat and mass transfer in
parallel plate liquid-desiccant dehumidifiers.
Solar Energy
, 80, 1475-1482.
Miller, W.M. (1983) Energy storage via desiccants for food/agricultural applications.
Energy in
Agriculture
, 2, 341-354.
Mittelman, G., Kribus, A. and Dayan, A. (2007) Solar cooling with concentrating photo-
voltaic/thermal (CPVT) systems.
Energy Conversion and Management
, 48, 2481-2490.
Murakami, S., Levine, M.D., Yoshino, H., Inoue, T., Ikaga, T., Shimoda, Y., Miura, S., Sera,
T., Nishio, M., Sakamoto, Y. and Fujisaki, W. (2009) Overview of energy consumption and
GHG mitigation technologies in the building sector of Japan.
Energy Efficiency
, 2, 179-194.
Nagaya, K., Senbongi, T., Li, Y., Zheng, J. and Murakami, I. (2006) High energy efficiency des-
iccant assisted automobile air-conditioner and its temperature and humidity control system.
Applied Thermal Engineering
, 26, 1545-1551.
Niu, J.L., Zhang, L.Z. and Zuo, H.G. (2002) Energy savings potential of chilled-ceiling
combined with desiccant cooling in hot and humid climates.
Energy and Buildings
, 34,
487-495.
Search WWH ::
Custom Search