Environmental Engineering Reference
In-Depth Information
Hasuike, H., Yoshizawa, Y., Suzuki, A. and Tamaura, Y. (2006) Study on design molten salt
solar receivers for beam-down solar concentrator.
Solar Energy
, 80, 1255-1262.
Herrmann, U. and Geyer, M. (2002) The AndaSol Project. Workshop on thermal storage for
trough systems. http://www.nrel.gov/csp/troughnet/wkshp_2003.html
IEA (2000). Leading options for the capture of CO
2
emissions at power stations. IEA, 419
Februray. PH3/14. 420.
IEA (2004). Improvement in power generation with post-combustion capture of CO
2
. 421IEA,
November. PH4/33.
Incropera, F. P. and DeWitt, D. P. (2007) Fundamentals of Heat and Mass Transfer. Water (Vol. 3,
p. 997). John Wiley. http://www.osti.gov/energycitations/product.biblio.jsp?osti_id=6008324
Infinia Company. http://www.infiniacorp.com/
Kearney, D., Herrmann, U., Kelly, B., Mahoney, R., Cable, R., Blake, D., Price, H., Potrovitza,
N., Pacheco, J. and Nava, P. (2003) Assessment of a molten salt heat transfer fluid in a
parabolic trough solar field.
Journal of Solar Energy Engineering
, 125, 170-176.
Kreith, F. and Goswami, Y. G. (2007)
Handbook of Energy Efficiency and Renewable Energy
.
Boca Raton, London, New York: CRC Press, Taylor and Francis Group.
Kimberlina Solar Plant. http://www.areva.com/mediatheque/liblocal/docs/pdf/activites/energ-
renouvelables/Areva_Kimberlina_flyer.pdf
Kongtragool, B. and Wongwises, S. (2003) A review of solar-powered Stirling engines and low
temperature differential Stirling engines.
Renewable and Sustainable Reviews
, 7, 131-154.
Kreith, F. and Goswami, Y. G. (2007)
Handbook of Energy Efficiency and Renewable Energy
.
Boca Raton, London, New York: CRC Press, Taylor and Francis Group.
Liddel Solar Plant. http://www.ausra.com/pdfs/LiddellOverview.pdf
Mancini, T., Heller, P., Butler, B. and Al., E. (2003) Dish-stirling Systems: An overview of
development and status.
Journal of Solar Energy Engineering
, 125, 135-151.
Manzolini, G., Giostri, A., Saccilotto, C., Silva, P. and Macchi, E. (2011a) Development of an
innovative code for the design of thermodynamic solar power plants part B: Performance
assessment of commercial and innovative technologies.
Renewable Energy
, 36, 2465-2473.
Manzolini, G., Giostri, A., Saccilotto, C., Silva, P. and Macchi, E. (2011b) Development of an
innovative code for the design of thermodynamic solar power plants part B: Performance
assessment of commercial and innovative technologies.
Renewable Energy
, 36, 2465-2473.
Manzolini, G., Macchi, E., Binotti, M. and Gazzani, M. (2011) Integration of SEWGS for carbon
capture in natural gas combined cycle. Part B: Reference case comparison.
International
Journal of Greenhouse Gas Control
, 5, 214-225.
Manzolini,
G.,
Macchi,
E.,
and
Gazzani,
M.
(2012)
CO
2
capture
in
integrated
gasification
combined
cycle
with
SEWGS
-
Part
B:
Economic
assessment.
Fuel
.
doi:10.1016/j.fuel.2012.07.043.
Martin Next Generation Solar Energy Center. http://www.cleanenergyactionproject.com/Clean
EnergyActionProject/CS.FPL_Martin_Next_Generation_Solar_Energy_Center___Hybrid_
Renewable_Energy_Systems_Case_Studies.html
Martini, W. (1983)
Stirling Engine Design Manual
(p. NASA CR-135382).
McIntire, W. (1982) Factored approximations for biaxial incident angle modifiers.
Solar Energy
,
29, 315-322.
Mertins,
M.
(2009)
Technische
und
wirtschaftliche
Analyse
von
horizontalen
Fresnel-
Kollektoren. University of Karlsruhe, Karlsruhe, Germany.
Moens, L., Blake, D., Rudnicki, D. and Hale, M. (2003) Advanced thermal storage fluids for
solar parabolic trough systems.
Journal of Solar Energy Engineering
, 125, 112-116.
Morin, D.E. (2009) Comparison of linear fresnel and parabolic trough collector systems -
Influence of linear fresnel collector design variations on break even cost. In:
Proceedings
of Solar Paces Conference
. 15-18 September 2009, Berlin (D).
Morin & Dersch, 2009
Search WWH ::
Custom Search