Civil Engineering Reference
In-Depth Information
Louis, C. (1969) A study of ground water flow in join-
ted rock and its influence on the stability of rock
masses. Doctorate thesis, Univ. of Karlsruhe (in
German). English translation:
Imperial College Rock
Mech. Research Report No. 10
,50pp.
McCauley, M. L., Works, B. W. and Naramore, S. A.
(1985)
Rockfall Mitigation
. Report FHWA/CA/TL-
85/12. FHWA, US Department of Transportation.
McClay, K. R. (1987)
The Mapping of Geological
Structures
, John Wiley & Sons, Sussex, UK.
McDonald, M. and Harbaugh, A. (1988) A modu-
lar three-dimensional finite-difference ground water
flow model.
US Geological Survey Tech. Water
Resources Inv.
, Bk. 6, Ch. A1.
McGuffey, V., Athanasiou-Grivas, D., Iori, J.
and Kyfor Z. (1980)
Probabilistic Embankment
Design—A Case Study
.
sliding type of failure is expected.
Imperial College
Rock Mechanics Research Report No. 19
,10pp.
Marsal, R. J. (1967) Large scale testing of rock fill
materials.
J. Soil Mech. Fdns. Div., ASCE
, 93, SM2,
27-44.
Marsal, R. J. (1973) Mechanical properties of rock
fill. In:
Embankment Dam Engineering, Casagrande
Volume
, Wiley and Sons, New York, pp. 109-200.
Martin, D. C. (1993)
Time-dependent deformation
of rock slopes
. PhD Thesis, University of London,
August, 1993.
Mearz, N. H., Franklin, J. A. and Bennett, C. P. (1990)
Joint roughness measurements using shadow profilo-
metry.
Int. J. Rock Mech. Min. Sci. & Geomech.
Abstr.
, 27(5), 329-43.
Meyerhof, G. G. (1984) Safety factors and limit states
analysis in geotechnical engineering.
Can. Geotech.
J.
, 21, 1-7.
Middlebrook, T. A. (1942) Fort Peck slide.
Proc.
ASCE
, Vol. 107, Paper 2144, p. 723.
Ministry of Construction, Japan (1983)
Reference
Manual on Erosion Control Works
(in Japanese),
Erosion Control Department, Japan, 386 pp.
Mohr, O. (1900) Welche Umstände bedingen die Elast-
izitätsgrenze und den Bruch eines Materials?
Z. Ver.
dt. Ing.
, 44, 1524-30; 1572-77.
Moore, H. (1986) Construction of a shot-in-place
rock buttress for landslide stabilization.
Proc. 37th
Highway Geology Symp.
, Helena, Montana, 21 pp.
Moore, D. P. and Imrie, A. S. (1982) Rock slope sta-
bilization at Revelstoke Dam site.
Trans. 14th Int.
Cong. on Large Dams
, ICOLD, Paris, 2, pp. 365-85.
Moore, D. P. and Imrie, A. S. (1993) Stabilization
at Dutchman's Ridge.
Proc. 6th Int. Symp. on Land-
slides
, Christchurch, NZ, Balkema, Vol. 3, 6 pp.
Moore, D. P., Imrie, A. S. and Enegren, E. G. (1997)
Evaluation and management of Revelstoke reservoir
slopes.
Int. Commission on Large Dams, Proc. 19th
Congress
, Florence, Q74, R1, 1-23.
Morgan, D. R., McAskill, N., Richardson, B. W. and
Zellers, R. C. (1989) A comparative study of plain,
polypropylene fiber, steel fiber, and wire mesh rein-
forced shotcretes. Transportation Research Board,
Annual Meeting, Washington, DC, 32 pp. (plus
appendices).
Morgan, D. R., Heere, R., McAskill, N. and Chan, C.
(1999) Comparative evaluation of system ductility
of mesh and fibre reinforced shotcretes.
Proc. Conf.
on Shotcrete for Underground Support VIII
, Engin-
eering Foundation (New York) Campos do Jordao,
Brazil, 23 pp.
Transportation Research
Board, Washington, DC.
McKinstry, R., Floyd, J. and Bartley, D. (2002) Elec-
tronic detonator performance evaluation at Barrick
Goldstrike Mines Inc.
J. Explosives Engng
, Int.
Soc. Explosives Eng., Cincinnati, OH, May/June,
pp. 12-21.
McMahon, B. K. (1982)
Probabilistic Design in
Geotechnical Engineering
.
Australian
Mineral
Foundation, AMF Course 187/82, Sydney.
Mahtab, M. A. and Yegulalp, T. M. (1982) A rejec-
tion criterion for definition of clusters in orient-
ation data.
Proc. 22nd Symp. on Rock Mech.
,
Berkeley, CA, Soc. Min. Eng., American Inst.
Mining, Metallurgical and Petroleum Engineers.
pp. 116-24.
Maini, Y. N. (1971) In situ parameters in jointed
rock—their measurement and interpretation. PhD
Thesis, University of London.
Mamaghani, I. H. P., Yoshida, H. and Obata, Y.
(1999) Reinforced expanded polystyrene Styrofoam
covering rock sheds under impact of falling rock.
Proc. Joint Japan-Swiss Sci. Seminar on Impact
Loading by Rock Falls and Design of Protection
Measures
, Japan Soc. Civil Eng., Kanazawa, Japan,
pp. 79-89.
Marinos, P. and Hoek, E. (2000). GSI—a geologic-
ally friendly tool for rock mass strength estimation.
Proc. GeoEng 2000 Conference
, Melbourne.
Marinos, P., and Hoek, E. (2001) Estimating the geo-
technical properties of heterogeneous rock masses
such as flysch. Accepted for publication in the
Bull.
Int. Assoc. of Engng Geologists
.
Markland, J. T. (1972) A useful technique for estimat-
ing the stability of rock slopes when the rigid wedge
