Hardware Reference
In-Depth Information
After you have inserted the standoffs and lined them up with the screw holes on the
motherboard,carefullyattachthescrewstosecurethemotherboardtothemotherboard
tray or case (see Tip below), depending on your chassis design.
Figure 19.17
shows a
motherboard attached to a tray. Note the use of the thumb and forefinger to stabilize
the screwdriver tip. This prevents accidental slippage of the screwdriver tip off of the
screw, which is one of the biggest causes of new board failures.
Figure 19.17
Attaching a motherboard to the motherboard tray.
