Hardware Reference
In-Depth Information
4. Click on
Ye s
to confirm.
Confirm overwriting the SD card
5.
It can take a while before the write cycle is completed.
Linux
There are two idenical methods to lash an SD card on a Linux machine. The two
approaches include:
F
A GUI-based approach
F
A command-line interface-based approach
A command-line interface-based approach
The SD card can be flashed in three simple steps using a command-line interface. These steps
are as follows:
1. Idenify the SD card mount point.
2.
Unmount the SD card.
3.
Flash the SD card.
Identifying the SD card mount point
As soon as we insert the SD card into a USB card reader or an SD card slot found on a laptop,
we need to open a terminal on our Linux machine. We need to idenify our device's mount
point on the machine using the following command:
df -h
