Graphics Programs Reference
In-Depth Information
select the box for the Maintain Annotation Orientation parameter. Click
OK.
4. Select the extrusion located at the intersection of the reference planes.
Click the Visibility Settings button located on the Mode panel of the
Modify | Extrusion contextual tab. Remove the check mark from the
Front/Back box in the Family Element Visibility Settings dialog box.
Also remove the check mark from the Coarse and Medium boxes. Click
OK.
5. Click the Symbol button on the Detail panel of the Annotate tab.
Confirm that the Ch21_J-Box annotation is shown in the Type Selector,
and click to place the annotation symbol in the drawing area near the
extrusion.
6. Click the Reference Plane button on the Datum panel of the Create tab,
and draw a vertical reference plane to the right of the vertical reference
plane that defines the origin.
7. Click the Align button on the Modify panel of the Modify tab. Select the
vertical reference plane drawn in step 6, and then move your mouse
pointer over the center of the annotation symbol, highlighting the
vertical reference within the annotation. Then click to align the symbol
to the reference plane. Click the padlock grip to lock the alignment.
8. With the Align tool still active, click the horizontal reference plane, and
then move your mouse pointer near the bottom quadrant of the
annotation symbol, highlighting the horizontal reference within the
Search WWH ::




Custom Search