Graphics Programs Reference
In-Depth Information
2. Draw a circle with the center point at the intersection of the reference
planes. The radius of the circle should be small (approximately 3/32″ or
2.5 mm) so that the annotation is the correct size at different view
scales.
3. Draw a line from one quadrant of the circle to the opposite quadrant.
Rotate the line 45 degrees, using the center of the circle as the axis, and
mirror the line by using one of the reference planes as the axis, creating
four equal quadrants within the circle.
4. Create a filled region by tracing over the top quadrant. Use invisible
lines for the border of the filled region and Solid Fill for the pattern.
Click the green check mark button on the contextual tab to finish
creating the filled region.
5. Mirror the filled region by using the reference plane perpendicular to
the region as the axis, to create another filled region directly opposite
the first region.
6. Click the Family Types button on the Properties panel of the Create tab.
Create a new parameter by clicking the Add button to the right of the
dialog box. Name the parameter FACE1 . Set the parameter as an
instance parameter, and set Type Of Parameter to Yes/No. Click OK.
7. Repeat step 6 to create another parameter named FACE2 . Click OK to
exit the Family Types dialog box.
8. Select one of the filled regions. Click the small box to the far right of the
Visible parameter in the Properties palette. Select FACE1 from the list
and click OK. Select the other filled region and repeat, choosing FACE2
from the list. Save and exit the family.
Search WWH ::




Custom Search