Graphics Programs Reference
In-Depth Information
Type Catalog References
Type catalogs can be referenced by using system parameters and shared
parameters. The format for the type parameter must be
##parameter
name##parameter type##units
; these parameter types and units must
exactly match the format required by Revit.
Here are a few examples of proper formatting:
Duct Width##HVAC_DUCT_SIZE##INCHES
Power##ELECTRICAL_POWER##WATTS
Air Flow##HVAC_AIR_FLOW##CUBIC_FEET_PER_MINUTE
Width##LENGTH##FEET
The following list contains some of the parameter types and their units
that can be used in creating a type catalog TXT file:
CommonTypes
Note: For Unit Types of Text, Integer, Number,
URL, Material, Yes/No, and <Family Type>, the Unit Type is Other
and there are no specific units.
Length
feet, inches, millimeters, centimeters, meters
Area
square_feet, square_inches, square_meters,
square_centimeters, square_millimeters, acres, hectares
Volume
cubic_yards, cubic_feet, cubic_inches, cubic_meters,
cubic_centimeters, cubic_millimeters, liters, gallons
Angle
degrees
HVAC Types
HVAC_duct_size
feet, inches, millimeters, centimeters, meters
HVAC_pressure
inches_of_water, pascals, kilopascals,
megapascals, pounds_force_per_square_inch, inches_of_mercury,
millimeters_of_mercury, atmospheres, bars
HVAC_friction
inches_of_water_per_100ft, pascals_per_meter