Graphics Programs Reference
In-Depth Information
The instance properties of the wire control the display of tick marks and the
number of conductors for the circuit. There are three options for the Tick
Marks parameter:
Calculated This is the default value for wires, and it indicates that the
number of conductors is determined by the circuit and distribution
system properties, regardless of whether the tick marks are displayed.
On Selecting On displays tick marks on the selected wire.
Off Selecting Off turns off the display of tick marks on the selected wire.
The number of conductors can be increased or decreased by editing the
values of the Hot, Neutral, and Ground Conductors parameters. You can
change the number of hot conductors by using the + and - editing grips that
appear in the drawing area when you select a wire. The location of the tick
marks on a wire can be changed by clicking the solid blue dot that appears
at the center of the tick marks when a wire is selected.
Panel Properties
In the instance properties of a panel, you can provide information about it
thatappearsinthepanelschedule.Youcanaddnotestotheheaderorfooter
ofapanelschedulebyclickingtheEditbuttonintheScheduleHeaderNotes
and Schedule Footer Notes parameters, respectively. The Mains parameter
is for indicating the size of the main circuit breaker and does not affect any
load calculations. The Max #1 Pole Breakers parameter allows you to assign
the number of poles in the panel. You can also indicate the short-circuit
rating, enclosure type, and any modifications by editing the respective
parameters.
You can define how the circuit tags will appear in your drawings by editing
the Circuit Naming, Circuit Prefix, and Circuit Prefix Separator parameters.
The standard wire tag is a label that displays the circuit number. There are
four options for circuit naming:
Panel Name This option places the name of the panel in front of the
circuit number when a wire or device is tagged. You can use a separator
such as a dash between the panel name and circuit number by using the
Circuit Prefix Separator parameter.
Search WWH ::




Custom Search