Graphics Programs Reference
In-Depth Information
a good practice to do this at the time of placement so that the
transformer will be available as an option for service when you establish
your distribution model. Selecting a transformer after it has been placed
activates the Distribution System drop-down list on the Options Bar.
This drop-down contains a list of all the distribution systems defined in
the electrical settings of your project. Only distribution systems that
match the connector voltage of your transformer appear in the list, as
shown in
Figure 13.18
.
Figure 13.18
Distribution System drop-down for a transformer
3. To set the distribution type for the secondary side of the transformer,
you need to access the element properties of the component. The
Secondary Distribution System parameter is an instance parameter that
contains a list of the distribution system types defined in the electrical
settings of your project. There is no connector in the transformer family
for the secondary side, but it is important to establish the distribution
system for connectivity of components in your distribution model.
Figure 13.19
shows the option for selecting a secondary distribution
system for a transformer.
