Graphics Programs Reference
In-Depth Information
Figure 7.38
General Settings area for a panel schedule template
The Circuit Table options allow you to define the format for the columns
that display circuit loads. Single-phase panels can be created, and options
for the third-phase loads column are available. These columns appear in the
center of your schedule no matter what you do to format the other columns.
The values in these columns cannot be edited, and you cannot replace them
with another parameter. In Revit MEP 2015 you have the ability to show the
phase values as either Load or Current.
The Loads Summary options let you set which load classifications will be
listed when the loads summary is included in your schedule. All load
classifications that exist in your project are shown on the left, and the ones
that appear in the schedule are listed on the right. If you choose the option
for displaying only those loads that are connected to the panel, all the
classifications move to the Scheduled Loads list. When you create a Panel
schedule, only the classifications that are connected appear; however, the
loads summary has blank rows for the unused classifications, as shown in
