Hardware Reference
In-Depth Information
Figure 5-11
The balance board base. Cut
two circles this size, and cut
the slots for the rockers in only
one of them. Then, laminate
the two circles together.
Design
courtesy of the Adaptive Design
Association.
12”
1”
cut along red lines
2”
15” diameter
2”
Figure 5-12
The balance board in action. The
two layers of triple-wall cardboard
are laminated with the grain of
their corrugations perpendicular
to each other. This gives the board
added stability. A couple of tabs
of Velcro hold the controller box
in place.
