Fatigue Design of Wind Turbines - Wind Turbine Technology: Fundamental Concepts of Wind Turbine Engineering - page 717

Wind Turbines , NASA CP-2230, DOE Publ. CONF-810752, Cleveland, Ohio: NASA
Lewis Research Center, pp. 447-467.
Spera, D. A., C. B. Ensworth III, and D. C. Janetzke, 1985, “Dynamic Loads in Large
Horizontal-Axis Wind Turbines - Part I: Field Test Data,” Proceedings, Windpower
'85Conference , SERI/CP-217-2902, Washington, DC: American Wind Energy
Association, pp. 557-462.
Spera, D. A., 1993, “Dynamic Loads in Horizontal-Axis Wind Turbines - Part II:
Empirical Equations,” Proceedings, Windpower '93 Conference , Washington, DC:
American Wind Energy Association, pp. 282-289.
Spera, D. A., 1994, “Dynamic Loads in Horizontal-Axis Wind Turbines - Part III: Design
Trend Charts,” Proceedings, Wind Energy - 1994 Symposium , SED-Vol. 15, W. D.
Musial et al ., eds., New York: American Society of Mechanical Engineers.
Suresh, S., 1991, Fatigue of Materials , New York: Cambridge University Press.
Sullivan, T. L., 1984, Effect of Vortex Generators on the Power Conversion Performance
and Structural Dynamic Loads of the Mod-2 Wind Turbine , NASA TM-83680,
DOE/NASA/20320-59, Cleveland, Ohio: NASA Lewis Research Center.
Sutherland, H. J., and L. L. Schluter, 1989-1990, “Fatigue Analysis of WECS Components
Using a Rainflow Counting Algorithm,” Proceedings, Windpower '90 Conference ,
Washington, DC: American Wind Energy Association.
Sutherland, H.J., and J. F. Mandell, 2005, Optimized Goodman Diagram for the Analysis
of Fiberglass Composites Used in Wind Turbine Blades , Paper AIAA-2005-0196,
Albuquerque, New Mexico: Sandia National Laboratories.
Tada, H., P. C. Paris, and G. R. Irwin, 1985, The Stress Analysis of Cracks Handbook , Saint
Louis, Missouri: Paris Productions, Inc.
Wahl, N.K., 2001, Spectrum Fatigue Lifetime and Residual Strength for Fiberglass
Laminates , Ph.D. Thesis, Department of Mechanical Engineering, Montana State
University, Bozeman, Montana.
Wahl, N.K., J.F. Mandell, and D.D. Samborsky, 2002, Spectrum Fatigue Lifetime and
Residual Strength for Fiberglass Laminates , Report SAND2002-0546, Albuquerque,
New Mexico: Sandia National Laboratories.
White, D., 2004, New Method for Dual-Axis Fatigue Testing of Large Wind Turbine Blades
Using Resonance Excitation and Spectral Loading , NREL/TP-500-35268, Golden,
Colorado: National Renewable Energy Laboratory.
Young, P., and T. M. Hasbrouck, 1983, “Installation, Checkout, and Acceptance Testing of
the Hamilton Standard 4-MW Wind Turbine System (WTS-4),” Proceedings, Sixth
Biennial Wind Conference , American Solar Energy Society, pp. 121-132.