Fatigue Design of Wind Turbines - Wind Turbine Technology: Fundamental Concepts of Wind Turbine Engineering - page 714

References
Ancona, D., and J. McVeigh, 2001, Wind Turbine - Materials and Manufacturing Fact
Sheet , Princeton Energy Resources International, prepared for Office of Industrial
Technologies, US Department of Energy.
ASTM, 1990, “Standard Practice E 1049-85 (Re-Approved 1990) for Cycle Counting in
Fatigue Analysis, “1993 Annual Book of ASTM Standards , Vol. 03.01, Philadelphia,
Pennsylvania: American Society for Testing and Materials.
ASTM, 1993, 1993 Annual Book of ASTM Standards , Section 3: Metals Test Methods and
Analytical Procedures, Philadelphia, Pennsylvania: American Society for Testing and
Materials.
ASTM, 2005, Standard Practices for Cycle Counting in Fatigue Analysis , E 1049-85
(Re-Approved 2005).
Basquin, O. H., “The Exponential Law of Endurance Tests,” Proceedings ASTM , Vol. 11,
1910, pp. 625-630.
Birchenough, A. G., A. L. Saunders, T. W. Nyland, and R. K. Shaltens, 1981, “Operating
Experience with Four 200-kW Mod-0A Wind Turbine Generators,” Proceedings,
Conference on Large Horizontal-Axis Wind Turbines , NASA CP-2230, DOE Publ.
CONF-810752, Cleveland, Ohio: NASA Lewis Research Center, pp. 469-490.
Boeing Engineering and Construction, 1979, Mod-2 Wind Turbine System Concept and
Preliminary Design Report, Volume II Detailed Report , NASA CR-159609,
DOE/NASA 0002-80/2, Cleveland, Ohio: NASA Lewis Research Center.
Boeing Aerospace Company, 1985, Goodnoe Hills Mod-2 Cluster Test Program, Vol. 2:
Structural and Mechanical Loads Tests and Analysis , EPRI AP-4060, Palo Alto,
California: Electric Power Research Institute.
Boeing Aerospace Company, 1988, Mod-5B Wind Turbine System Final Report, Volume
II Detailed Report , NASA CR 180897, DOE/NASA 0200-4, Cleveland, Ohio: NASA
Lewis Research Center.
Broek, D., 1982, Elementary Engineering Fracture Mechanics , Boston, Massachusetts:
Martinus Nijhoff Publishers.
Collins, J. L., R. K. Shaltens, R. H. Poor, and R. S. Barton, 1981, “Experience and
Assessment of the DOE/NASA Mod-1 2000-kW Wind Turbine Generator at Boone,
North Carolina,” Proceedings, Conference on Large Horizontal-Axis Wind Turbines ,
NASA CP-2230, DOE Publ. CONF-810752, Cleveland, Ohio: NASA Lewis Research
Center, pp. 491-574.
Cosmos Solidworks Corp., 2005, Design to Prevent Fatigue , White Paper, Santa Monica,
California.