Environmental Engineering Reference
In-Depth Information
References
Banks, W., and G. Gadd, 1963, “Delaying Effect of Rotation on Laminar Separation,” AIAA
Journ. , v. 1, n. 4, pp. 941-942.
Barnsley, M., and J. Wellicome, 1992, “Wind Tunnel Investigation of Stall Aerodynamics
for a 1.0 m Horizontal Axis Rotor,” Journ. Wind Engineering and Industrial
Aerodynamics , v. 39, pp. 11-21.
Bierbooms, W., 1992, “A Comparison Between Unsteady Aerodynamic Models,” Journ.
Wind Engineering and Industrial Aerodynamics , v. 39, n. 1-3, pp. 23-33.
Brand, A., 1994, To Estimate the Angle of Attack of an Airfoil from the Pressure
Distribution , ECN Technical Report, ECN-R-94-002.
Carr, L. W., 1988, “Progress in Analysis and Prediction of Dynamic Stall”, Journ. Aircraft ,
v. 25, n. 1, pp. 6-17.
Chaviaropoulos, P., and M. O. L. Hansen, 2000, “Investigating Three-Dimensional and
Rotational Effects of Wind Turbine Blades by Means of a Quasi-3D Navier-Stokes
Solver,” Journ. of Fluids Engineering , v. 122, pp. 330-336.
Corrigan, J., and J. Schillings, 1994, Empirical Model for Stall Delay Due to Rotation ,
American Helicopter Society Aeromechanics Specialist Conf.
Corten, G., 2001, “Inviscid Stall Model,” Proceedings, European Wind Energy Conference,
July 2001 , pp. 466-469.
Coton, F., and R. Galbraith, 1999, “An Experimental Study of Dynamic Stall on a Finite
Wing,” The Aeronautical Journal , v. 103, no. 1023, pp. 229-236.
Du, Z., and M. Selig, 2001, A 3-D Stall-Delay Model for Horizontal Axis Wind Turbine
Performance Prediction , AIAA-98-0021: American Institute of Aeronautics and
Astronautics.
Eggers, A., and R. Digumarthi, 1992, “Approximate Scaling of Rotational Effects on Mean
Aerodynamic Moments and Power Generated by CER Blades Operating in Deep-
Stalled Flow,” Proceedings, 11 th ASME Wind Energy Symposium : American Society
of Mechanical Engineers.
Eggleston, D., 1990, “New Results in Flow Visualization for Wind Turbines,” Proceedings,
AWEA Windpower Conference, September, 1990 , Washington, DC: American Wind
Energy Association.
Freymuth, P., 1988, “Three-Dimensional Vortex Systems of Finite Wings,” Journ. Aircraft ,
v. 25, n. 10, pp. 971-972.
Germanischer-Lloyd, 1998, Rules and Regulations, IV-Non-Marine Technology, Part 1-
Wind Energy Converters , Chapter 4, p. 2-3.
Gupta, S., and J. G. Leishman, 2006, “Dynamic Stall Modeling of the S809 Aerofoil and
Comparison with Experiments,” Wind Energy , v. 9, n. 6, pp. 521-547.
Search WWH ::




Custom Search