Environmental Engineering Reference
In-Depth Information
Rankine, W. J. M., 1865, “On the Mechanical Principles of the Action of Propellers,”
Transactions
,
Institute of Naval Architects
, Vol. 6: pp. 13-30.
Reuss, R. L., M. J. Hoffman, and G. M. Gregorek, 1995,
Effects of Surface Roughness and
Vortex Generators on the NACA 4415 Airfoil
, NREL/TP-442-6472, Golden, CO:
National Renewable Energy Laboratory, December.
Ribner, N. S., 1948,
Propellers in Yaw
, NACA Report 820, Washington, DC.
Robinson, D., F. Coton, R. Galbraith, and M. Vezza, 1994,
The Development of a
Prescribed Wake Model for the Prediction of the Aerodynamic Performance of
Horizontal Axis Wind Turbines in Steady Axial Flow
, Tech. Rep. No. 9403,
Department of Aerospace Engineering, University of Glasgow.
Robinson, D., F. Coton, R. Galbraith, and M. Vezza, 1995, “Application of a Prescribed
Wake Aerodynamic Prediction Scheme to Horizontal Axis Wind Turbines in Axial
Flow,”
Wind Engineering
, Vol. 19: pp. 41-51.
Savino, J. M., T. W. Nyland, and A. G. Birchenough, 1985,
Relection Plane Tests of a
Wind Turbine Blade Tip Section with Ailerons
, NASA TM-87018, DOE/NASA
20320-65, Cleveland, Ohio: NASA Lewis Research Center.
Shankar, P. N., 1975,
On the Aerodynamic Performance of a Class of Vertical Axis Wind-
mills
, AE TM-13-15, Bangalore, India: National Aeronautical Laboratory.
Sheldal, R. E., and P. C. Klimas, 1981,
Aerodynamic Characteristics of Seven Symmetrical
Airfoil Sections Through 180-Degree Angle of Attack for Use in Aerodynamic Analysis
of Vertical Axis Wind Turbines
, SAND80-2114, Albuquerque, New Mexico: Sandia
National Laboratories.
Schreck, S., 2002, “The NREL Full-Scale Wind Tunnel Experiment,”
Wind Energy
, Vol. 5:
pp. 77-84.
Schreck, S. J., N. N. Sorensen, M. C. Robinson, 2007, “Aerodynamic Structures and
Processes in Rotationally Augmented Flow Fields,”
Wind Energy
, Vol. 10, No. 2: pp.
159-178.
Simms, D., S. Schreck, M. Hand, and L. J. Fingersh, 2001,
NREL Unsteady Aerodynamics
Experiment in the NASA-Ames Wind Tunnel: A Comparison of Predictions to
Measurements
, NREL/TP-500-29494, Golden, CO: National Renewable Energy
Laboratory.
South, P., and R. S. Rangi, 1972,
A Wind Tunnel Investigation of a 14-ft Diameter
Vertical Axis Windmill
, NRC Laboratory Technical Report LTR-LA-105, Ottawa:
National Research Council of Canada.
Strickland, J. H., 1975,
The Darrieus Turbine: Performance Prediction Model Using
Multiple Streamtubes
, SAND75-0431, Albuquerque, New Mexico: Sandia National
Laboratories.
Search WWH ::
Custom Search