Environmental Engineering Reference
In-Depth Information
Boeing Aerospace Company, 1988, Mod-5B Wind Turbine System Development Final
Report - Vol. I, Executive Summary , NASA CR-180896, DOE/NASA/0200-3,
Cleveland, Ohio: NASA Lewis Research Center.
Bongers, P. M. M., G. E. van Baars, and S. Dijkstra, 1993, “DUWECS: A Wind Turbine
Design Tool,” Proceedings, Windpower '93 Conference , Washington, DC: American
Wind Energy Association, pp. 305-312.
Bonneille, R., 1974, “French Contribution to Wind Power Development - by EDF 1958 -
1966,” Proceedings, Advanced Wind Energy Systems, Vol. 1, (published 1976),
O. Ljungström, ed., Stockholm: Swedish Board for Technical Development and
Swedish State Power Board, pp. 1-17 to 1-22.
Bovarnick, M. L., and W. W. Engle, 1985, “The Evolution of the Mod-2 and Mod-5B Wind
Turbine Systems, “ Proceedings, Windpower '85 , SERI/CP-217-2902, Washington,
DC: American Wind Energy Association, pp. 158-163.
Clark, R. N., 1983, “Agricultural Wind Energy Research -- An Overview,” Proceedings,
Sixth Biennial Wind Energy Conference and Workshop , B. H. Glenn, ed., Boulder,
Colorado: American Solar Energy Society, pp. 31-34.
Collins, J. L., R. K. Shaltens, R. H. Poor, and R. S. Barton, April 1982, Experience and
Assessment of the DOE-NASA Mod-1 2000-kW Wind Turbine Generator at Boone,
North Carolina , NASA TM-82721, DOE/NASA/23066-2, Cleveland, Ohio: NASA
Lewis Research Center and The General Electric Company.
Dieter, G. E., J. Chapman, H. T. Hahn, D. H. Hodges, C. W. Rogers, L. Valavani, and
M. D. Zuteck, 1981, Assessment of Research Needs for Wind Turbine Rotor Materials
Technology , National Research Council Report NAT S-324, Washington, DC: National
Academy Press.
Elliott, D. L., C. G. Holloday, W. R. Barchet, H. P. Foote, and W. F. Sandusky, 1987, Wind
Energy Resource Atlas of the United States , DOE/CH-10094-4, Golden, Colorado:
National Renewable Energy Laboratory; also available from American Wind Energy
Association, Washington, DC.
Ferber, R., 1977, “Public Reactions to Wind Energy and Windmill Designs,” Proceedings,
Third Biennial Conference and Workshop on Wind Energy Conversion Systems , CONF
770921, Washington, DC: JBF Scientiic Corporation, pp. 413-419.
Foreman, K. M., and G. L. Gilbert, 1979, “Technical Development of the Diffuser
Augmented Wind Turbine (DAWT) Concept,” Wind Engineering , Vol. 3, No. 4:
pp. 153-166.
Frandsen, S. (ed.), 1990, Recommended Practices for Wind Turbine Testing and Evaluation
- Vol. 1: Power Performance Testing , Second Edition, Lyngby, Denmark: Department
of Fluid Mechanics, Technical University of Denmark.
Frederick, G. R., and J. M. Savino, 1986, Summary of Tower Designs for Large Horizontal
Axis Wind Turbines , NASA TM-87166, DOE/NASA/20320-68, Cleveland, Ohio:
NASA Lewis Research Center.
Search WWH ::




Custom Search