Environmental Engineering Reference
In-Depth Information
Doppler current profi ler.
Journal of Hydraulic
Engineering
,
128
(5), 473-83.
Richards, K. S. & Milne, L. M. (1979) Problems in the
calibration of an acoustic device for the observation of
bedload transport.
Earth Surface Processes
,
4
, 335-46.
Richardson, K., Benson, I. & Carling, P.A. (2003) An
instrument to record sediment movement in bedrock
channels. In
Erosion and Sediment Transport
Measurement: Technological and Methodological
Advances
, J. Bogen, T. Fergus & D. Walling (eds), 228-
35. Oslo, Norway: International Association of
Hydrological Sciences, Publication 283.
Rickenmann, D. (1994) Bedload transport and discharge in
the Erlenbach stream. In
Dynamics and Geomorphology
of Mountain Rivers
, P. Ergenzinger & K.-H. Schmidt
(eds), 53-66,
Lecture Notes in Earth Sciences
,
52
Berlin:
Springer Verlag.
Rickenmann, D. (1997) Sediment transport in Swiss tor-
rents.
Earth Surface Processes and Landforms
,
22
,
937-51.
Rickenmann, D. & Dupasquier, P. (1994) Messung des
feststofftransportes im Erlenbach. [Sediment transport
measurement in the Erlenbach stream].
Beiträge zur
Geologie der Schweiz - Hydrologie
,
35
, 134-44.
Rickenmann, D. & Fritschi, B. (in press). Bedload transport
measurements using piezoelectric impact sensors and
geophones. In Gray J. R., Laronne J. B., and Marr,
J. D. G., in press, Bedload-surrogate monitoring tech-
nologies: U.S. Geological Survey Scientifi c Investigations
Report, in press.
Rickenmann, D., Hofer, B. & Fritschi, B. (1997)
Geschiebemessungen mittels Hydrophon.
Österrechische
Wasser- und Abfallwirtschaft
,
49
.
Rosenfeld, C. L., Castro, J. M. & Childers, E. S. (1996)
Individual gravel tracking using a passive radio trans-
ponder system. In
Proceedings of the 6th Federal
Interagency Sedimentation Conference, Las Vegas,
Nevada
, V47 - V51, http://water.usgs.gov/pubs/misc_
reports/FISC_1947-2001/, accessed August 31, 2004.
Rouse, H. L. (1994) Measurement of bedload gravel trans-
port: the calibration of a self-generated noise system.
Earth Surface Processes and Landforms
,
19
, 789-800.
Rubin, D. M., Tate, G. B., Topping, D. J. & Anima, R. A.
(2001) Use of rotating side-scan sonar to measure
bedload. In
Proceedings of the 7th Federal Interagency
Sedimentation Conference, Reno, Nevada
, vol. 1, III 139
- III 143, http://water.usgs.gov/pubs/misc_reports/
FISC_1947-2001/, accessed August 31, 2004.
Ryan, S. E. (1998) Sampling bedload transport in coarse-
grained mountain channels using portable samplers. In
Proceedings of the Federal Interagency Workshop
“Sediment Technology for the 21st Century”, St.
Petersburg, FL
, http://water.usgs.gov/osw/techniques/
sedtech21/ryan.html, accessed September 2, 2004.
Ryan, S. E. (2001) The infl uence of sediment supply on
rates of bedload transport: a case study of three streams
on the San Juan National Forest. In
Proceedings of
the 7th Federal Interagency Sedimentation Conference,
Reno, Nevada
, vol. 1, III 48 - III 54, http://water.
usgs.gov/pubs/misc_reports/FISC_1947-2001/, accessed
August 31, 2004.
Ryan, S. E. & Dixon, M. (2002) Bedload movement in a
mountain gravel-bed stream. CD-ROM Video,
Technology Transfer, Stream Systems Technology
Center, Fort Collins, CO.
Ryan, S. E. & Emmett, W. W. (2002) The nature of fl ow
and sediment movement in Little Granite Creek near
Bondurant, WY. USDA Forest Service, Rocky Mountain
Research
Station,
General
Technical
Report
RMRS-GTR-90.
Ryan, S. E. & Porth, L. S. (1999) A fi eld comparison of
three pressure-difference bedload samplers.
Geo-
morphology
,
30
, 307-22.
Ryan, S. E. & Troendle, C. A. (1997) Measuring bedload
in coarse-grained mountain channels: procedures, prob-
lems, and recommendations. In
Water Resources
Education, Training, and Practice: Opportunities for the
Next Century, American Water Resources Association
Conference, Keystone, CO
, 949-58.
Ryan, S. E., Bunte, K. & Potyondy, J. P. (2005) Breakout
session II, bedload-transport measurements: data needs,
uncertainty, and new technologies. In
Proceedings of the
Federal Interagency Sediment Monitoring Instrument
and Analysis, Workshop, September 9-11 2003, Flagstaff,
Arizona
, J. R. Gray (ed.), US Geological Survey Circular
1276,
16-28.
http://water.usgs.gov/pubs/circ/2005/
circ1276.
Schmidt, K. H. & Ergenzinger, P. (1992) Bedload entrain-
ment, travel lengths, step lengths, rest periods, studied
with passive (iron, magnetic) and active (radio) tracer
techniques.
Earth Surface Processes and Landforms
,
17
,
147-65.
Schmidt, K. H. & Gintz, D. (1995) Results of bedload
tracer experiments in a mountain river. In
River
Geomorphology
, E. J. Hickins (ed.), 37-54. Chichester,
UK: John Wiley.
Sear, D. A. (1996) Sediment transport processes in pool-
riffl e sequences.
Earth Surface Processes and Landforms
,
21
, 241-62.
Sear, D. A. (2003) Event bed load yield measurement with
load cell bed load traps and prediction of sediment yield
from hydrograph shape. In
Erosion and Sediment
Transport Measurement: Technological and
Methodological Advances
, J. Bogen, T. Fergus & D.
Walling (eds), 146-53. Oslo, Norway: International
Association of Hydrological Sciences, Publication 283.
Sear, D. A., Damon, W. , Booker, D. J. & Anderson, D. G.
(2000) A load cell based continuous recording bedload
trap.
Earth Surface Processes and Landforms
,
25
,
689-72.
Sear, D. A., Lee, M. W. E., Carling, P. A., Oakley, R. J. &
Collins, M. B. (2003) An assessment of the accuracy of
