Graphics Reference
In-Depth Information
Figure 5-18. Part Q connects to Part P (Extruder Bearing Hinge I).
Summary
You made a few more cuts in this chapter than in the previous one. We hope the process went smoothly
and that you're beginning to see how some (or maybe all) of the parts will fit together.
So now that you have all 17 parts cut out and labeled, it's time to move on to the more advanced
cuts that some parts require and to the drilling of holes. Warning: there are a lot of holes to drill. Again,
the key is to take your time. (During the drilling operation of one key piece, we rushed it and ended up
ruining the part, so we had to cut another one.)
In Chapter 6, we're going to walk you through the detail work needed to finish each wood piece.
Again, we recommend that you read the chapters ahead (or, even better, the entire topic) so that you'll
have an idea of what to expect. Note that you're free to perform the remaining cuts and drilling tasks in
any order you see fit; we chose the order of the next few chapters based on the perceived complexity of
the work required.
Search WWH ::
Custom Search