Graphics Reference
In-Depth Information
Continued
#
Hardware
1
5/16" x 1" hex head bolt
1
5/16"
nut
1
Tube clamp (approx 1-1/2" diameter)
1
Zip
tie
1
Serrated collar
1
Heat sink for feed cylinder on extruder
1
Arduino mega
1
MakerBot motherboard (book using v2.4)
4
Stepper motor drivers (book using v3.3)
1
Extruder controller (book using v3.5)
30
Nylon spacers, 1/4" long x 1/4" outer diameter x .14" inner diameter
24
#4 x ¾" flat head Phillips wood screw
3' minimum
Data cable, minimum 3' length, (multi-color recommended), minimum of six wire
strands per cable
8
6-wire connectors (these come with the stepper motor drivers from Makerbot.com)
1
RS-485 cable (a standard Ethernet pass-through cable will work), 2-3' length
minimum
Search WWH ::
Custom Search