Graphics Reference
In-Depth Information
Figure 18-24. Add a wood screw to trigger the table's endstop pushbutton.
Finally, use the Z-axis motor couple to turn the lead screw until the end of the lead screw is
completely flush with the underside of the Z-Axis Nut Mount (Part N). After doing this, the bottom edge
of the Strong-Ties will just be visible, as shown in Figure 18-25. Insert a #6-32-1-1/2” machine screw into
the Strong-Tie's hole (also shown in Figure 18-25) and secure it with a #6-32 nut so that it doesn't move.
Search WWH ::
Custom Search