Graphics Reference
In-Depth Information
Figure 18-9. Determine the available length of wire for the various Molex connectors.
You're going to want as much length as possible and will use Molex extensions and/or splitters to
extend the reach of the wires so they can be plugged into the motor drivers and Extruder controller.
Figure 18-10 shows a typical Molex splitter. You can buy these in various lengths, but do try to buy
the longest you can find. You'll likely need 7 or 8 of the shorter 6” extensions shown in Figure 18-10 but
they do make them in 12” lengths. Buy the longer lengths if you can find them.
Search WWH ::
Custom Search