Graphics Reference
In-Depth Information
Figure 17-9. Y- and Z-axis motor drivers with six-wire ribbon cables attached
The Y-axis motor will move the Y- and Z-axis assemblies left and right on the Y-axis (Strong Tie)
rails, and you don't want these ribbon cables interfering with that movement. Use a plastic tie to secure
the wires to the side of the Machine Back, as shown in Figure 17-10. This will keep the ribbons out of the
way and move them toward the side where the motherboard is mounted. Don't tighten the tie down
much; leave a large opening, as you'll be using this opening later to route more cables.
Search WWH ::
Custom Search