Graphics Reference
In-Depth Information
Attach the Extruder Controller
The final task for this chapter is to attach the Extruder Controller just above the Extruder stepper motor
driver. The Extruder Controller will also be attached using only three wood screws (with nylon spacers
behind the board).
Hold the board in place and drill three pilot holes before attaching the Extruder Controller. When
done, it should be mounted just above the Extruder stepper motor driver, as shown in Figure 16-14.
Figure 16-14. Extruder Controller mounted to the Z-Axis Rail Support
Search WWH ::
Custom Search