Graphics Reference
In-Depth Information
Push the mechanism back as far as possible. Ideally, you want about 1” or so of space between the
Z-Axis Rail Support (Part K) and Part Q. On each of the three machine screws, tighten one 1/4” nut
against the Z-Axis Rail Support and another 1/4” nut against the back of Part Q.
Secure everything by tightening one 1/4” nut onto each of the three machine screws, as shown in
Figure 15-16.
Figure 15-16. Add three 1/4” nuts to secure the mechanism in place.
Search WWH ::
Custom Search