Graphics Reference
In-Depth Information
Figure 15-4. Insert a zip tie but don't close it.
Add the Stepper Motor
Now it's time to add the stepper motor. You will use three #6-32 x 1” machine screws along with three #6
washers and three #6-32 nuts to secure the motor to Part Q. The motor will press down on a piece of the
plastic tie; this is normal.
Figure 15-5 shows the three screws inserted first into the washers and then into the counterbored
holes on Part Q. (The plastic tie has been removed temporarily so you can see the proper counterbored
holes where the machine screws are inserted.)
Search WWH ::
Custom Search