Graphics Reference
In-Depth Information
Figure 13-28. Secure the ends of the belt with washers pinching the belt above and below.
Make certain that the belt is still in place on the pulley and bearings and secure the other end to the
Strong-Tie bracket on the opposite end of the Table.
Summary
You now have three (of four) motors attached. All that's left of the assembly portion is to build and
attach the Extruder and mount the motor drivers and 3DP controllers to the machine. After that, you'll
turn your attention to the software and actually getting your 3DP to do something.
You're almost there, so take a well-deserved break and admire the machine that you've built.
Search WWH ::
Custom Search