Graphics Programs Reference
In-Depth Information
12. Create a new point at the center of the
nose, about the same distance from the
bridge as the point you created in Step
11. Then create a second point slightly
off to the right and down a bit. This
second point will act as a constraint,
allowing us to shape the spline better
to fit the nose. Finally, select the
remaining points shown in Figure
14-21 and create a new spline.
13. In the Right viewport, create two more
points as shown in Figure 14-22. The
first should be placed in the temple
region of the head and the second
should be placed above and in front of
the ear. Deselect these points, then
reselect them in the proper (sequen-
tial) order and create a new spline.
Figure 14-21
Figure 14-22
