Introduction - Finite Element Analysis and Design of Steel and Steel-Concrete Composite Bridges - page 44

[1.44] S.H. Kim, J.H. Yoon, J.H. Kim, W.J. Choi, J.H. Ahn, Structural details of steel
girder-abutment joints in integral bridges: an experimental study, J. Constr. Steel
Res. 70 (2012) 190-212.
[1.45] K. Miyachi, S. Nakamura, A. Manda, Progressive collapse analysis of steel truss bridges
and evaluation of ductility, J. Constr. Steel Res. 78 (2012) 192-200.
[1.46] X.W. Ye, Y.Q. Ni, J.M. Ko, Experimental evaluation of stress concentration factor of
welded steel bridge T-joints, J. Constr. Steel Res. 70 (2012) 78-85.
[1.47] I.P. Zaforteza, M.E.M. Garlock, A numerical investigation on the fire response of a
steel girder bridge, J. Constr. Steel Res. 75 (2012) 93-103.
[1.48] X.W. Ye, Y.Q. Ni, K.Y. Wong, J.M. Ko, Statistical analysis of stress spectra for
fatigue life assessment of steel bridges with structural health monitoring data, Eng.
Struct. 45 (2012) 166-176.
[1.49] L.T. Mo, X. Fang, D.P. Yan, M. Huurman, S.P. Wu, Investigation of mechanical
properties of thin epoxy polymer overlay materials upon orthotropic steel bridge
decks, Constr. Build. Mater. 33 (2012) 41-47.
[1.50] H. Yoo, H.S. Na, D.H. Choi, Approximate method for estimation of collapse loads of
steel cable-stayed bridges, J. Constr. Steel Res. 72 (2012) 143-154.
[1.51] Y. Shifferaw, F.S. Fanous, Field testing and finite element analysis of steel bridge ret-
rofits for distortion-induced fatigue, Eng. Struct. 49 (2013) 385-395.
[1.52] F. Cavadas, C. Rodrigues, C. F ´ lix, J. Figueiras, Post-rehabilitation assessment of a
centenary steel bridge through numerical and experimental analysis, J. Constr. Steel
Res. 80 (2013) 264-277.
[1.53] G. Brunell, Y.J. Kim, Effect of local damage on the behavior of a laboratory-scale steel
truss bridge, Eng. Struct. 48 (2013) 281-291.
[1.54] B. Cheng, Q. Qian, H. Sun, Steel truss bridges with welded box-section members and
bowknot integral joints, Part I: linear and non-linear analysis, J. Constr. Steel Res.
80 (2013) 465-474.
[1.55] B. Cheng, Q. Qian, H. Sun, Steel truss bridges with welded box-section members and
bowknot integral joints, Part II: minimum weight optimization, J. Constr. Steel Res.
80 (2013) 475-482.
[1.56] H.G. Kwak, Y.J. Seo, C.M. Jung, Effects of the slab casting sequences and the drying
shrinkage of concrete slabs on the short-term and long-term behavior of composite
steel box girder bridges. Part 2, Eng. Struct. 23 (2000) 1467-1480.
[1.57] I.S. Ahn, M. Chiewanichakorn, S.S. Chen, A.J. Aref, Effective flange width provi-
sions for composite steel bridges, Eng. Struct. 26 (2004) 1843-1851.
[1.58] C.J. Chang, D.W. White, An assessment of modeling strategies for composite curved
steel I-girder bridges, Eng. Struct. 30 (2008) 2991-3002.
[1.59] J.H. Ahn, C. Sim, Y.J. Jeong, S.H. Kim, Fatigue behavior and statistical evaluation of
the stress category for a steel-concrete composite bridge deck, J. Constr. Steel Res.
65 (2009) 373-385.
[1.60] H.Y. Kim, Y.J. Jeong, Steel-concrete composite bridge deck slab with profiled sheet-
ing, J. Constr. Steel Res. 65 (2009) 1751-1762.
[1.61] H.Y. Kim, Y.J. Jeong, Ultimate strength of a steel-concrete composite bridge deck
slab with profiled sheeting, Eng. Struct. 32 (2010) 534-546.
[1.62] J.J.O. Pedro, A.J. Reis, Nonlinear analysis of composite steel-concrete cable-stayed
bridges, Eng. Struct. 32 (2010) 2702-2716.
[1.63] S.T.D. Freitas, H. Kolstein, F. Bijlaard, Composite bonded systems for renovations of
orthotropic steel bridge decks, Compos. Struct. 92 (2010) 853-862.
[1.64] S.H. Kim, J.H. Choi, Experimental study on shear connection in unfilled composite
steel grid bridge deck, J. Constr. Steel Res. 66 (2010) 1339-1344.
[1.65] J. Machacek, M. Cudejko, Composite steel and concrete bridge trusses, Eng. Struct.
33 (2011) 3136-3142.