Graphics Reference
In-Depth Information
Solution
When we import the 3D model into Lumion, Lumion uses the origin axis as the point
to place the 3D model. So, if the building is not close to this point, it is normal to see
that when we place the 3D model in Lumion, the building is not at the point where
we placed it. However, if we rotate the camera, we can see it. The solution to this
issue is to move the 3D model close to the origin axis.
I still cannot see my 3D model
Well, there is another reason why we might not see the 3D model. Look at the
next image:
It might be difficult to read the information on the image, but the height of this
building is just 6,186 mm or 0.618 meters. So, unless this is a house for ants, there is
something wrong with the scale of the building, and when we import the 3D model
into Lumion, it is natural that we cannot see the building because it is so small.
Solution
Check the scale of the 3D model and scale it to a real-world size. However, there is
another problem that might occur when importing the 3D model into Lumion.
