General Provisions - Nuclear Power Plant Instrumentation and Control Systems for Safety and Security - page 28

IEC. (2011). IEC 61513. Nuclear power plants -
Instrumentation and control important to safety
- General requirements for systems .

DI&C-ISG-01. (2007). Cyber Security. Interim
Staff Guidance on Digital Instrumentation and
Control , Cyber Security, US NRC.

Kharchenko, V., & Sklyar, V. (Eds.). (2008).
FPGA-based NPP: Instrumentation and control
systems: Development and safety assessment.
National Aerospace University KhAI . State
Scientific and Technical Centre for Nuclear and
Radiation Safety.

DI&C-ISG-02. (2009). Diversity and Defense-in-
Depth (D3). Revision 2, Interim Staff Guidance
on Diversity and Defense-in-Depth Issues. Interim
Staff Guidance on Diversity and Defense-in-Depth
Issues , USNRC.

DI&C-ISG-03. (2008). Risk-Informed Digital
Instrumentation and Controls. Interim Staff
Guidance on Review of New Reactor Digital
Instrumentation and Control Probabilistic Risk
Assessments, USNRC.

NP. (2000). NP 306.5.02/3.035. Nuclear and
radiation safety requirements to instrumentation
and control systems important to nuclear power
plants safety . Kiev, Ukraine: State Nuclear Regu-
latory Committee.

DI&C-ISG-04. (2009) Highly Integrated Con-
trol Rooms & Digital Communication Systems.
Revision 1, Interim Staff Guidance on Highly-
Integrated Control Rooms - Communications
Issues (HICRc), USNRC.

NP. (2008). NP 306.2.141. General provisions on
the safety of nuclear power plants . Kiev, Ukraine:
State Nuclear Regulatory Committee.

Rosenberg, M., & Bobryakov, S. (2003). Else-
vier's dictionary on nuclear engineering . London:
Elsevier Science.

DI&C-ISG-05. (2009). Highly Integrated Con-
trol Rooms & Digital Communication Systems.
Revision 1, Interim Staff Guidance on Highly-
Integrated Control Rooms - Communications
Issues (HICRc), USNRC.

Smith, J., & Simpson, K. (2001). Functional safety:
A straight forward guide to IEC 61508 and related
standards . Oxford, UK: Butterworth Heinemann.

DI&C-ISG-06. (2009). Licensing Process Licens-
ing Process Interim Staff Guidance, USNRC.

Storey, N. (1996). Safety-critical computer sys-
tems . Reading, MA: Addison Wesley Longman.

Dunn, W. R. (2002). Practical Design of Safety-
Critical Computer Systems, Reliability Press,
Solvang. USA.

Yastrebenetsky, M., Vasilchenko, V., & Vino-
gradska, S. et al. (2004). Nuclear power plants
safety: Instrumentation and control systems . Kiev:
Technika. EPRI. 1008124. (2004). Practical Maintenance of

Digital Systems , Electric Power Research Institute,
Palo Alto, CA, USA.

ADDITIONAL READING

EPRI. 1011851. (2005). Guidance for the Design
and Use of Automation in Nuclear Power Plants,
Electric Power Research Institute, Palo Alto, CA,
USA.

Booher, H. R. (2003). Handbook of Human Sys-
tems Integration . Wiley. doi:10.1002/0471721174

Courtois, P.-J. (2008). Justifying the Dependability
of Computer-based Systems . (With Application to
Nuclear Engineering). Springer.