Compilation of References - Nuclear Power Plant Instrumentation and Control Systems for Safety and Security - page 436

IAEA. (1999). INSAG-12. Basic safety principles for
nuclear power plants (75-INSAG-3, Rev. 1) . Vienna,
Austria: IAEA.

IAEA. (2011). Computer security at nuclear facilities:
Reference manual: Technical guidance . Vienna, Austria:
IAEA.

IAEA. (1999). Modern instrumentation and control for
nuclear power plants . Vienna, Austria: IAEA.

IAEA. (2011). NP-T-3.12. Core knowledge on instru-
mentation and control systems in nuclear power plants .
Vienna, Austria: IAEA.

IAEA. (1999). Modern instrumentation and control for
nuclear power plants: Guidebook (Technical reports
series, Nº387) . Vienna, Austria: IAEA.

IAEA. (2011a). SSR-2/2. Safety of nuclear power plants:
commissioning and operation: Specific safety require-
ments . Vienna, Austria: IAEA.

IAEA. (1999a). INSAG-12. Basic safety principles for
nuclear power plants . Vienna, Austria: IAEA. IAEA. (2011a). SSR-2/2. Safety of nuclear power plants:

Commissioning and operation: Specific safety require-
ments . Vienna, Austria: IAEA.

IAEA. (1999b). Modern instrumentation and control
for nuclear power plants: A guidebook . Vienna, Austria:
IAEA. IAEA. (2012). SSR-2/1. IAEA safety standards : Safety of

nuclear power plants: Design: Specific safety require-
ments . Vienna, Austria: IAEA.

IAEA. (1999c). Verification and validation of software
related to nuclear power plant instrumentation and con-
trol . Vienna, Austria: IAEA. IAEA. (2012). SSR-2/1. Safety of nuclear power plants:

Design: Specific safety requirements . Vienna, Austria:
IAEA.

IAEA. (2000a). NS-R-1. Safety of nuclear power plants:
Design: Safety requirements . Vienna, Austria: IAEA.

IAEA. (2013a). DS-431. (Draft safety guide). Design of
instrumentation and control systems for nuclear power
plants . Vienna, Austria: IAEA.

IAEA. (2000b). NS-G-1.1. Software for computer based
systems important to safety in nuclear power plants: Safety
guide . Vienna, Austria: IAEA.

IAEA. (2013b). The statute of the IAEA. Retrieved from
www.iaea.org/About/statute.html

IAEA. (2000c). NS-R-2. Safety of nuclear power plants:
Operation: Safety requirements . Vienna, Austria: IAEA.

IEC (2005a). IEC 62138. Nuclear power plants - Instru-
mentation and control important for safety -. Software
aspects for computer-based systems performing category
B or C functions.

IAEA. (2002). Instrumentation and control systems im-
portant to safety in nuclear power plants: Safety guide .
Vienna, Austria: IAEA.

IAEA. (2002b). NS-G-2.3. Modifications to nuclear power
plants: Safety guide . Vienna, Austria: IAEA.

IEC (2011). IEC 61513. Nuclear power plants - Instru-
mentation and control important to safety - General
requirements for systems.

IAEA. (2006). NS-G-1.3. Fundamental safety principles .
Vienna, Austria: IAEA.

IEC 60812 (2006). Analysis technique for system reli-
ability - Procedure for Failure Mode and Effects Analysis
(FMEA). International Electrotechnical Commission.

IAEA. (2007). Terminology used in nuclear safety and
radiation protection: IAEA safety glossary . Vienna,
Austria: IAEA.

IEC 60880 (2006). Nuclear power plants - Instrumenta-
tion and control systems important to safety - Software
aspects for computer-based systems performing category
A functions. International Electrotechnical Commission.

IAEA. (2009). Safety assessment for facilities and activi-
ties: General safety requirements. IAEA safety standards
series No. GSR Part 4 . Vienna, Austria: IAEA.

IAEA. (2010). Governmental, legal and regulatory frame-
work for safety: General safety requirements. IAEA safety
standards series No. GSR Part 1 . Vienna, Austria: IAEA.