Compilation of References - Nuclear Power Plant Instrumentation and Control Systems for Safety and Security - page 435

GND. (2000). Methods of assessment of compliance
of I&C systems important to NPP: Safety with nuclear
and radiation safety requirements . Kiev, Ukraine: State
Nuclear Regulatory Administration of Ukraine.

Hashemian, H. M. et al. (1998). Advanced instrumentation
and maintenance technologies for nuclear power plants
(NUREG/CR-5501) . Washington, DC: U.S. Nuclear
Regulatory Commission.

Goldrin, V. et al. (2001). NPP instrumentation and control
systems safety standardization and assessment (3), prin-
ciples of hardware life extension. Nuclear and Radiation
Safety , 2 , 24-29.

Hashemian, H. M. (2005). Sensor performance and reli-
ability . Research Triangle Park, NC: The Instrumentation,
Systems and Automation Society.

Holmgren A., Molin S. (2006) Using Disturbance Data to
Assess Vulnerability of Electric Power Delivery Systems.
Journal Infrastructure systems, American Society of Civil
Engineers (ASCE), 12 (4), 243-251.

Gorbenko, A., Kharchenko, V., & Romanovsky, A. (2009).
Using Inherent Service Redundancy and Diversity to
Ensure Web Services Dependability In Methods, Models
and Tools for Fault Tolerance, M. Butler, C. Jones, A.
Romanovsky, E. Troubitsyna (Eds.), pp. 324-341, LNCS
5454, Springer.

Huang, H.-W., Wang, L.-H., Liao, B.-C., Chung, H.-H., &
Jiin-Ming, L. (2011). Software safety analysis application
of safety-related I&C systems in installation phase. Prog-
ress in Nuclear Energy , 6 (53), 736-741. doi:10.1016/j.
pnucene.2011.04.002

Gorelik, A., Eliseev, V., Kugil, A., et al. (2005). Concep-
tion of in-core reactor monitoring system modernization
of Uktainian NPP. Nuclear and Radiation Safety, 2.

Huffmire, T. et al. (2010). Handbook of FPGA design se-
curity . Berlin: Springer. doi:10.1007/978-90-481-9157-4

Gorochov, A. et al. (2004). Explanation of neutron-
physical and radiation parts in WWER design . Moscow:
Akademkniga.

Hughes, P. J., & Johnson, G. L. (2000). Instrumentation
and control systems important to safety: A new IAEA
safety guide. International Topical Meeting on Nuclear
Plant Instrumentation, Controls, and Human-Machine
Interface Technologies (NPIC&HMIT 2000). Washington,
DC: NPIC & HMIT.

GOST. (1991). GOST 29216. Electromagnetic compatibil-
ity of technical means: Man-made noise from information
technology equipment: Limits and test methods.

GOST. (1992a). Information technology: Types of test-
ing of automated systems . Moscow, Russia: Publishing
House of Standards.

IAEA. (1980). 50-SG-D3. Protection systems and related
features in nuclear power plants . Vienna, Austria: IAEA.

GOST. (1992b). Information technology: Complex of
standards on automated systems: Automated systems:
Stages of creation . Moscow, Russia: Publishing House
of Standards.

IAEA. (1984). 50-SG-D8. Safety related instrumentation
and control systems for nuclear power plants . Vienna,
Austria: IAEA.

IAEA. (1988). 50-C-D. Code on the safety on nuclear
power plants: Design . Vienna, Austria: IAEA.

GOST. (1998). GOST 30546.1. Common requirements
for seismic resistance of equipment, devices and other
technical items and methods of their calculations . GOST.

IAEA. (1997). Safety problems of nuclear power plants
with WWER-1000/320 reactors (IAEA EBP-WWER-05) .
Vienna, Austria: IAEA. Grand, J. (2004). Practical secure hardware design for

embedded systems. In Proceedings of the 2004 Embedded
Systems Conference . San Francisco, CA: Academic Press.

IAEA. (1998). TECDOC-1016. Modernization of instru-
mentation and control in nuclear power plants . Vienna,
Austria: IAEA. Hashemian, H. (2006). Maintenance of process instru-

mentation in nuclear power plants . Berlin: Springer.

IAEA. (1999). Basic safety principles for nuclear power
plants.75- INSAG-3, Rev. 1 . Vienna, Austria: IAEA.