Compilation of References - Nuclear Power Plant Instrumentation and Control Systems for Safety and Security - page 433

Babeshko, E., et al. (2008). Applying F(I)MEA-technique
for SCADA-based industrial control systems dependability
assessment and ensuring. In Proceedings of International
Conference on Dependability of Computer Systems Dep-
CoS-RELCOMEX 2008 . Academic Press.

Bashlykov, A. (1986). Designing of decision-making
systems in power engineering . Moscow, Russia: En-
rgoatomizdat.

Bedford, T., & Cooke, R. M. (2001). Probabilistic
Risk Analysis: Foundation and Methods . Cambridge,
England: Cambridge University Press. doi:10.1017/
CBO9780511813597

Babeshko, E., et al. (2009). Extended dependability
analysis of information and control systems by FME(C)
A-technique: Models, procedures, application. In Proceed-
ing of IEEE DepCoS RELCOMEX Conference . IEEE.

Beliy, E. et al. (2008). Infomedia development concept
in the state scientific and technical centre for nuclear and
radiation safety. Nuclear and Radiation Safety , 2 , 59-68. Babeshko, E., et al. (2010). Approaches to NPP I&C

systems dependability assessment: Analysis and imple-
mentation. In Proceedings of International Congress on
Advances in Nuclear Power Plants (ICAPP. '10). ICAPP.

Belohin, O., Brenman, O., Kudinov, Yu, et al. (2007).
Reconstruction of computer information system of South-
Ukrainian NPP. unit 2. Nuclear and Radiation Safety, 1 .

Babeshko, E. et al. (2011). Combined implementation of
dependability analysis techniques for NPP I&C systems
assessment. Journal of Energy and Power Engineering ,
5 (42), 411-418.

Belohin, O., et al. (2010). Automatic control system of
diesel-generator for NPP: Emergency supply . Westron.
Retrieved from http://www.westron.kharkov.ua/SAU_
RDES.pdf

Bachmatch, E., Marshevsky, M., Rozen, Y., et al. (2008).
Assurance and safety assessment of fire-alarm systems
and automatic fire extinguishing in the accommodations
NPP. Nuclear and Radiation Safety, 1.

Ben-Ari, M. (2000). Understanding programming lan-
guages . Wiley.

Bessalov, G. et al. (2004). Middle power WWER reactors .
Moscow: Akademkniga.

Bachmatch, E., Vinogradska, S., Rozen, Y., et al. (2005).
The software-hardware complexes for the power automatic
regulation, reactors power reduction and limitation and
acceleration preventive protection: the safety insurance
and assessment. Nuclear and Radiation Safety, 1.

Biscoglio, I., & Fusani, M. (2010). Analyzing quality
aspects in safety-related standards. In Proceedings of
Seventh American Nuclear Society International Topical
Meeting on Nuclear Plant Instrumentation, Control and
Human-Machine Interface Technologies NPIC&HMIT
2010. Las Vegas, NV: American Nuclear Society.

Badrignans, B. et al. (2011). Security trends for FPGAS:
From secured to secure reconfigurable systems . Berlin:
Springer. doi:10.1007/978-94-007-1338-3

Bobrek, M., Bouldin, D., Holkomb, D., et al. (2009).
Review guidelines for FPGAs in nuclear power plants
safety systems. NUREG/CR-7006 ORNL/TM-2009/020.

Bakhmach, E., Kharchenko, V., Siora, A., Sklyar, V., &
Tokarev, V. (2009). Advanced I&C Systems for NPPS
Based on FPGA Technology: European Experience.
Paper presented at the meeting of the 17th International
Conference on Nuclear Engineering, Belgium.

Bouard, J.-P. (2002). International standardization in
nuclear I&C engineering. In Proceedings of CNRA/CSNI
Workshop on Licensing and Operating Experience of
Computer-Based I&C Systems. AEN/NEA.

Bakhmach, E., Siora, A., Bezsalyi, V., & Yastrebenetsky,
M. (2008). Digital systems for reactor control: design,
experience of operation. In Proceedings of the 16th In-
ternational Conference on Nuclear Engineering. Orlando,
FL: ICONE16.

Bowles, J. B. (2004). An assessment of PRN prioritization
in a failure modes effects and criticality analysis. Journal
of the IEST , 47 , 45-54.

Barkalov, A. et al. (2006). Design of control units with
programmable logic . University of Zelena Gura.